Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Brushless Motor Driver Module, 3 or 4 wires, sensorless, CW-CCW selector, 5-12VDC
Quickly control 3- or 4-wire sensorless brushless motors without additional components, 7-12VDC power supply for speed adjustment via potentiometer and speed increase with voltage. The direction of rotation is simply selected CW or CCW via jumper, and the board includes reverse polarity, overcurrent and short circuit protection for safe use in projects.
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
Driver module for brushless motors, with 3 or 4 wires, which does not require additional components to work. Compatible motors are those with voltages between 7 and 12VDC. The higher the voltage used, the higher the engine speed.
On the board there is a rotation selector, with a jumper, for CW (clockwise) and CCW (counter-clockwise).
The motor speed is controlled from the potentiometer on the pad.
The board has polarity protection, over-current protection and short-circuit protection.
Locating the common port (COM) of the 4-wire motor:
To determine which wire of the motor is the common one (COM), all 4 terminals will be measured with a multimeter set to the resistance check. The one with the lowest resistance connected to the other 3 wires is COM.
Specifications:
Supply voltage: 7 - 12VDC
Maximum current: 1.2A
Speed: 0 - 100%, by potentiometer
Direction of rotation: CW-CCW, selectable by jumper
Compatible: Brushless motors, with 3 or 4 wires, automatic recognition
Dimensions mm: 63 x 45mm
Motor connection:
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
