Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Balance charger, LiPo, 2-4S, Type-C power supply, 60W
Ultra-portable charger with balance for 2-4S LiPo batteries, ideal for FPV drones and radio model making, USB Type-C power supply from PD or QC 5-20V sources, power up to 60W with selectable charging current 1-6A, XT60 plug and XH balance port, includes abnormal voltage protection and cell error detection, supports firmware update via PC.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
Balance charger for Lithium-Ion, LiPo, LiFe, LiHv, 1-4S and NiMh, NiCd 1-12S batteries. This is a small, ultra-portable charger that can be powered from any PD or QC type source, which offers a supply voltage between 5 and 20VDC. The charger manages to charge Lithium batteries up to 4S even when powered by a source without QC or PD standards, of only 5V, but in order to work, it necessarily requires a source of 5V over 1A.
The charger also has the battery balancing function, being ideal for batteries used in FPV drones and radio modeling in general. The battery connector is XT60 type.
Supports firmware updates via PC.
It can charge with selectable current between 1A and 6A, but not more than 60W (for 60W it is necessary that the power supply can supply 20V at 3A). The maximum current with which it can be charged is correlated with the maximum power of the power source used.
It presents safety functions such as abnormal voltage alarm, incorrect setting alarm of the number of cells.
The charger is cooled passively with the help of the aluminum radiator.
Specifications:
Model: PD60
Supply voltage: 5 - 20VDC
Power plug: Type-C
Maximum input current: 3A
Selectable charging current: 1A, 2A, 3A, 6A
Balanced current: 0.5A per cell, maximum
Support: QC2.0/3.0, PD2.0/3.0
Incompatible supply voltage: 5V, 1A (more than 1A required at 5VDC)
Supported batteries: LiPo, Li-Ion, LiFe, LiHv, NiMH, Cd
Lithium battery configuration supported: from 1S to 4S
NiMH and Cd battery configuration supported: from 1S to 12S
Balance Port: 5 pin, XH2.54
Operating temperature: 0 - 40 degrees C
Cooling: Passive ( do not cover the vents )
Dimensions mm: 126 x 115 x 49mm
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
