Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Addressable LED strip quick connector, 10mm, T-shape, 3P
Allows for quick creation of a T-shaped branch for 10mm addressable LED strips, without soldering, with secure connection via 3 pins and internal T-shaped PCB. The durable PVC housing ensures durability, is compatible with WS2811, WS2812B, WS2813 and SK6812 RGB, supports 5V, 12V and 24V, ideal for installations requiring parallel branches.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
Quick connector that allows for a T-shaped joint without the need for soldering, being ideal for addressable LED strip installations that require branching. It is made of outdoor-resistant PVC plastic, PCB arranged in a T-shape between the connectors, and has 3 pins.
The connector is suitable for RGB addressable strips, but it is important to remember that the data signal in addressable strips only works in one direction. Thus, the T-connector can be successfully used with WS2812 addressable strips with the caveat that the branches will run in parallel (see picture below).
For silicone coated strips, it is necessary to remove the protective layer in the connection area to ensure proper contact.
Specifications:
Connector type: T-shape
Available pins: 3PIN
Number of connectors: 3
Compatibility: WS2811, WS2812B, WS2813, SK6812 5050 SMD RGB
Supported voltage: 5V, 12V, 24V
LED strip width: 10mm
Outer material: PVC plastic
Use:
Open the connector cover and insert the LED strip into the slot.
Correctly align the contacts (+ and -) of the strip with those of the connector.
Close the lid until it snaps tightly.
For waterproof LED strips, remove the silicone layer from the contact area before connecting.
Pull the tape gently to check for proper fixation.
Attention: when used with addressable strips, respect the signal direction indicated on the PCB (arrows). The T connector distributes the power correctly, but for the data signal it is necessary to connect in line or use a signal amplifier.
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
