Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Acrylic robotic arm kit 4 axes
Unassembled kit for making a 4-axis robotic arm, ideal for educational projects, prototyping and automation experiments. Includes acrylic structure and complete set of screws and nuts for assembling the frame, allows precise movements on 4 degrees of freedom, is compatible with SG90 and MG90S servomotors, assembly tutorial is available in PDF format.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
4-axis robotic arm kit made of acrylic.
Unassembled kit
Attention! DOES NOT INCLUDE SERVOMOTORS
Kit contents:
- Unassembled arm structure parts
- Screws and nuts needed for frame assembly
*The additional parts mentioned in tutorials as well as in the videos from the product description are NOT included (development boards, modules, wires, pillars, etc.).
Assembly:
You can download the assembly tutorial in PDF format from the attached files.
Compatible with servomotors: SG90 and MG90S
Version 2:
The arm in the example may have slight differences (especially at the gripper), depending on the batch.
Do not use a self-tapping screwdriver! The parts are made of acrylic and can break if you're not careful! Some holes are smaller and others larger in diameter because in some of them, screws are threaded into the plates (the hole is threaded when screwing in), others are larger and allow free rotation of the screws.
Assembled arm images:
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
Reviews (4) - Review moderation
Ce fel de servo se folosesca
Relativ usor de asamblat si fara tutorial. Piesele nu sunt fragile, rar apar defecte de suprafata / crapaturi.
Totul este perfect! Initial am asamblat dupa tutoriale pe Youtube, imi lipseau componente de la servomotorul cu gheare. Am gasit un alt tutorial, e diferit de tutorialele care abunda pe youtube. Kitul este COMPLET! Studiati cu atentie, nici n-ar avea cum sa lipseasca,acestea vin introduse in placa de pe care au fost taiate, daca lipseau , acolo apareau goluri.
din prima imagine piesa din partea dreapta sus slotul mai mare nu are dimensiunea corespunzatoare
