Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
1.75 filament sensor, 3D printer, 1m cable
Kit for detecting filament interruption in 3D printers, stops printing and allows resumption after repair. Compatible with 1.75 mm filament, includes detector module and 1 m cables, 3.5-5 V power supply with HIGH/LOW signal output at the supply voltage level. It has 3 wires for power and signal, easy mounting with 3.5 mm holes and insertion direction marked on the housing.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
Sensor kit for detecting the interruption of filament supply to 3D printers. The set is composed of the detector module and 1 meter long wires.
Depending on the electronic board used in the 3D printer, it is necessary to adapt the firmware to add the function of detecting the interruption of the filament and pausing the print until the problem is solved.
The module has 3 wires, two for power (plus and minus) and another wire for signal. The signal voltage is equivalent to the supply voltage. This signal is transmitted to the board in HIGH or LOW format.
The arrow marked on the module represents the filament feeding direction.
Specifications:
Supply voltage: 3.5 - 5V
Filament: 1.75mm (not compatible with 3mm filament)
Dimensions mm: 37 x 44 x 10.6mm
Color: White or Black, depending on the batch
Fixing hole diameter: 3.5mm
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
