Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
1-5V to 5V step-up module, HW626
Compact step-up module that converts 1-5V DC to stable 5V, ideal for powering Arduino projects, sensors and USB devices from low voltage batteries. Provides up to 500mA depending on input voltage, operates at 150kHz for efficient conversion, has efficiency up to 85% and 2.54mm pitch pins on 10x10mm PCB.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
Boost voltage module from 1-5V DC to 5V DC with small dimensions, 96% efficiency, T2005. This module boosts current from 1 to 5 V to 5V.
Do not exceed the supply voltage of 5V! The input power must always be greater than the output power, otherwise the output voltage will be below the standard value.
The output current increases with the supply voltage as follows:
1-1.5V: 5V, 40-100mA
1.5-2V: 5V, 100-150mA
2-3V: 5V, 150-380mA
3-5V: 5V, 380-480mA
Specifications:
Supply voltage: 1-5VDC
Integrated circuit: 2108A-50
Output voltage: 5VDC
Output current: 500mA max
Operating frequency: 150KHz
Conversion efficiency: 85%
Pin spacing: 2.54mm
PCB dimensions mm: 10 x 10 x 1
- tension
- AD
- Supply Voltage
- 1
- Maximum Input Voltage
- 5
- Minimum Output Voltage
- 5
- Maximum Output Voltage
- 5
- Source Type
- high
- Current Adjustment
- Not
- Voltage Adjustment
- Not
- Adjustment Type
- Fixed
- Maximum Output Current
- 0.5
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
