Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
ZVS induction heating module, 1000W, 20A, 12-30V
ZVS induction heating module, ideal for rapid heating of metal parts with an external coil, operates at 12-30V DC, delivers up to 1000W and 20A under optimal conditions, soft start for high load, can also be used as a power inverter by replacing the coil with a transformer, requires active cooling for stable operation.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
The ZVS (Zero Voltage Switching) mode is used in conjunction with a coil to heat metal elements by induction.
The advantage of induction heating is the speed with which the metal heats up compared to other methods.
Replacing the copper coil with a transformer can turn this module into a power inverter.
The module requires active cooling. Overheating it in use will damage the module. The start-up is slow due to the power, the voltage will rise slowly once powered.
IMPORTANT: Do not exceed 1/5 of the available volume in the coil . The module will overheat and probably burn out. We recommend installing an ammeter on the module to ensure that you do not exceed the safety limit of 15A. It will work above 15A but will overheat.
MOUNT THE SPIRAL DIRECTLY ON THE PCB! Even if there are screw contacts, avoid mounting on them and solder directly on the route. We also recommend thickening the tin layer on the back of the board and on the inductor contacts. If the components are not well soldered, the respective contacts will overheat.
It can provide a maximum power of 1000W and 20A at a voltage of 53V. We recommend a power supply between 12V and 30V and a safe amperage of 15A, although it can even handle 30A for short periods of time.
The kit DOES NOT INCLUDE the copper coil (spiral, inductor). This can be handmade from copper or purchased separately.
See pictures below:
Specifications:
Supply voltage: 12 - 30VDC
Maximum current: 20A, 10 recommended
Maximum power: 1000W
Dimensions mm: 85 x 69 x 30mm
Type: ZVS
No-load current: 3A at 24V, 6A at 48V
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
