Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Voltage step-down module, 6-40V, CV-CC, 300W
DC-DC step-down converter with precise regulation in CV-CC mode, ideal for power supplies and electronic projects that require stable voltage and current limiting. It accepts 6-40V at input and provides 1.2-36V adjustable at output, up to 300W and 20A max. It has high efficiency, dual power MOSFET, screw terminals for quick connections and heat sinks for heat dissipation.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
The voltage step-down module, with a capacity of up to 300W and 20A MAXIMUM ( recommended up to 15A ), designed to provide an efficient and precise regulation of voltage and current from an input voltage between 6V and 40VDC to a voltage of adjustable output between 1.2V and 36VDC.
It is equipped with a high-capacity dual MOSFET, 75V/80A, allowing the management of large loads with an efficiency of up to 96%.
It has the ability to maintain a stable output due to the use of high frequency electrolytic capacitors (Low ESR), with low resistance, which minimizes oscillations and ensures a constant and reliable output.
For easy installation, the module includes 30A screw terminals for quick connection. The heat dissipation is effectively managed by two radiators that maximize the elimination of the heat generated during operation.
The module can be turned off or on through the integrated switch, marked ON/OFF.
The two multi-turn potentiometers on the module allow regulation of the maximum voltage and current, the module being a CC and CV type.
It is important to note that, in case of a large difference between the input and output voltage, it is recommended to reduce the power and current to avoid overheating. At least during the commissioning phase, make sure that the module works in the optimal temperature parameters. Overheating the module will cause it to burn.
Specifications:
Input Voltage: 6V - 40VDC (10V - 40V recommended)
Output Voltage: 1.2V at 36VDC
Output Current: Maximum 20A, recommended up to 15A
Efficiency: 95% (for conversion from 24V to 12V at 20A)
Output Ripple: ≤50mV
Connection Method: Screw Terminals
Short Circuit Protection: Self-healing (does not support long-term short circuit)
Adjustments: CV (output voltage adjustment), CC (output current adjustment), EN (enable/disable)
Dimensions: 60 x 53 x 27mm
Use:
Connecting the Power Supply:
Connect +IN to the positive of the power supply and -IN to the negative.
Make sure that the input voltage does not exceed 40V to avoid damaging the module.
Output Adjustment:
Use the CV potentiometer to adjust the desired output voltage.
Adjust the DC potentiometer to set the output current limit, preventing the connected load from being overloaded.
Activating the Module:
Use the ON/OFF switch to turn the module on or off.
Important:
Check regularly that the module does not overheat and that the voltage and current values remain within the set limits.
Do not overload the module. Keep usage below 80% of maximum capacity to ensure reliable and durable operation.
Ensure adequate ventilation and, if necessary, use additional cooling solutions such as active fan cooling.
- tension
- AD
- Supply Voltage
- 6
- Maximum Input Voltage
- 40
- Minimum Output Voltage
- 1
- Maximum Output Voltage
- 36
- Source Type
- descend
- Current Adjustment
- Yes
- Voltage Adjustment
- Yes
- Adjustment Type
- Variable
- Maximum Output Current
- 20
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
Reviews (1) - Review moderation
Am achiziționat acest modul pentru a alimenta o pompă electrică de 13.8V cu un consum nominal de 10A (de la Decathlon), folosind o baterie de 15.6V ca sursă. Teoretic, modulul de 20A ar fi trebuit să facă față fără probleme, având o rezervă dublă de putere. Problema: În realitate, în momentul pornirii, motorul pompei generează un vârf de curent (inrush current) care depășește pragul de protecție al convertorului. Modulul intră în protecție instantaneu, tensiunea scade drastic și pompa se oprește după doar o fracțiune de secundă. Deși pompa funcționează perfect dacă este conectată direct la baterie, acest limitator nu poate gestiona șocul inițial de pornire al unui motor de 10A. Concluzie: Dacă intenționați să îl folosiți pentru motoare, asigurați-vă că aveți o rezervă de curent mult mai mare sau utilizați un circuit de soft-start. Pentru sarcini rezistive (benzi LED, încălzitoare) probabil este excelent, dar pentru pompe de mare putere, protecția electronică este prea sensibilă.
