Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
UNO R3 Starter Kit, V8
Complete kit to quickly start projects with Arduino, includes UNO R3 compatible board and a wide selection of modules for experiments and prototyping. The components are organized in a modular two-story box, a prototyping shield with breadboard, LED and LCD1602 displays, sensors and actuators such as servo and stepper motor, connectors and USB cable included. No instructions included.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
Beginner's kit in the world of Arduino composed of the UNO R3 development board, compatible with Arduino and various modules and components that you can use to make several projects.
All components are arranged in a modular plastic box that will keep them organized on two floors and several compartments.
It does NOT contain instructions for use and/or assembly.
Kit Contents:
1 x UNO R3 board
1 x Shield Protoripare with breadboard
1 x SMD storage box
30 x red, yellow and green LEDs (10 each)
1 x active buzzer
1 x Passive Buzzer
4 x Switches
2 x Display Led (with 4 and 1 digits)
2 x Ball switch
3 x Photoresistor
1 x Potentiometer
1 x Flame sensor
1 x Infrared receiver
10 x Resistor 220 Ohm
10 x 1K Resistor
10 x 10K Resistor
1 x LM35 temperature sensor
1 x USB cable
30 x Dupont Thread Male - Male
1 x 9V battery connector
1 x Infrared remote control
1 x LCD1602
1 x Servo motor SG90
1 x 74HC595 stepper motor
1 x ULN2003 stepper motor driver
1 x 8x8 Led Matrix
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
Reviews (1) - Review moderation
Produse de calitate si preturi bune. Pacat ca multe dintre produse nu sunt pe stoc.
