Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Thermostat module XH-W1411, Heating-Cooling, LED display, temperature control, 12VDC
Thermostat module for heating and cooling, ideal for automatic control of fans, heaters or other temperature-sensitive equipment. It clearly displays the current temperature and set thresholds on the LED display, allows precise adjustment and calibration, includes NTC probe with 1 m cable, retains settings during power outages and also offers a timer mode for programmed cycles.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
The XH-W1411 thermostat module with LED display and temperature control is an efficient solution to control and monitor the temperature in various applications. This module offers a simple and precise way to maintain the temperature at the desired level in a certain environment. With its help, you can automatically control heating devices, cooling systems or other temperature-sensitive equipment.
Equipped with a bright LED display, this thermostat module allows a clear and easy visualization of the set values and the current temperature. With the help of the control buttons, you can adjust the desired temperature precisely. on the left is displayed the minimum starting temperature, in the middle the current temperature and on the left the maximum stopping temperature. Below these displays are the temperature setting buttons.
The memory function keeps the temperature settings in case of power failure.
It has several functions. It can be used in both heating and cooling mode, depending on how it is set. It can also be used as a timer .
Important: The output acts as a closed/open contact.
Functions: Settable by the SET key. The screen in the middle indicates how the module works. Functions do not work together. If it is an F-1, it no longer works as a thermostat or vice versa.
Normal: Normal working mode, like a thermostat
When the current temperature is shown in the middle display, the thermostat works in thermostat mode.
Heating mode: Start temperature (left display) < Stop temperature (right display
Cooling mode: Start temperature (left display) > Stop temperature (right display
F-1: Intermittent working mode
This mode allows intermittent temperature control, turning on and off the heating or cooling devices at regular time intervals. The settings for this mode include a time interval to start and a time interval to stop. For example, you can set the thermostat to start heating for one minute and turn it off for three minutes in an intermittent cycle. It works in minutes, from 1 to 99 minutes. The ON time is displayed on the left of the thermostat, the OFF time on the right.
F-2: Regular stop mode
In this mode, you can set the thermostat to turn off the heating or cooling devices regularly at preset time intervals. This can be useful to maintain the temperature in a specific range, interrupting the operation of the heating or cooling system at certain intervals. The hours are displayed on the left and the minutes on the right, up to 99 hours and 99 minutes.
F-3: Scheduled start mode
The F-3 mode allows you to program the thermostat to automatically start heating or cooling at certain time intervals. This can be useful to ensure that the temperature is adjusted in the desired way at certain times of the day. The hours are displayed on the left and the minutes on the right, up to 99 hours and 99 minutes.
Specify:
Supply voltage: 12VDC
Temperature measurement range: -50°C to 110°C
Temperature control range: -19°C to 99°C
Accuracy: ±0.1°C
Display resolution: 0.1°C
Timer hours limit: 99 hours
Timer minute limit: 99 minutes
Screen: LED display with backlight
Control buttons: Temperature adjustment button, confirm/set button
Temperature sensor: NTC (Negative Temperature Coefficient) sensor
Probe cable length: 1 meter
Control mode: On/Off
Relay: 250VAC, 10A
LED indicators: Status indicator (on/off), active heating/cooling indicator
Dimensions: Approximately 75 x 55 x 31mm
Diameter of holes for mounting ears: 3mm
Login:
Stop:
Press and hold the SET button for a few seconds to turn off the thermostat. A short press on any button will start the module.
Calibration:
With the Thermostat not powered, hold down the SET button and power up while holding down the SET button. 0.0 is displayed in the middle of the screen. Immediately, using the buttons on the left, compensate with plus or minus the temperature difference between the displayed and the real one. After a few seconds of inactivity, the thermostat will exit the calibration mode.
Self-diagnosis:
With the thermostat not powered, hold down the UP and DOWN arrows on the left side of the thermostat at the same time and power up with the buttons pressed. Keep pressed until the beep is complete.
Reset:
With the thermostat not powered, hold down the UP and DOWN arrows on the right of the thermostat at the same time and power up with the buttons pressed. 88-888-88 will be displayed in the middle. Keep pressed until the beep is complete.
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
