Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Smart Car Kit 4WD, Bluetooth, IR, Ultrasound
Kit for building a 4WD robot car controllable via Bluetooth or IR remote control, suitable for Arduino projects. Includes chassis with 4 motors and wheels, L298N driver and UNO compatible board, plus sensors for obstacle avoidance with HC-SR04 and line tracking with IR modules, providing the basis for manual control or autonomous operation.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
Intelligent 4WD robot kit, controllable via Bluetooth or IR, obstacle avoidance and line following functions.
For assembly instructions and example code access the link: Smart Car Tutorial
Attention: There are many codes with different configurations available online as "open source". This is not a "standard" kit with step-by-step instructions. The instructions in the files provided on the site may have component differences (for example, the kit does not include an LCD1602 screen) or may require compiling different code.
WE DO NOT RECOMMEND THIS PRODUCT TO PERSONS WHO HAVE NOT WORKED WITH THE COMPONENTS IN THE KIT BEFORE AND WHO DO NOT HAVE EXPERIENCE IN PROGRAMMING AND USING THE UNO R3 BOARD! THIS IS NOT A KIT WITH STEP-BY-STEP INSTRUCTIONS. THIS PRODUCT IS A COLLECTION OF COMPONENTS NECESSARY FOR ASSEMBLING THE ROBOT. IF YOU ARE NOT SURE, PLEASE DO NOT PURCHASE THIS KIT!
With the components in the kit, you can build a car controllable via Bluetooth or IR remote control. The components also allow you to create a fully autonomous car that can avoid obstacles or follow a line.
For beginners, we recommend approaching the project progressively, starting with simple motor control via Bluetooth with Arduino and an H bridge. Example here (even though the H bridge in the tutorials is different, the pins are the same).
Kit contents:
4 x Motors
4 x Wheels
4 x Motor mounts
1 x 250 x 160 x 3mm transparent acrylic plate
1 x 250 x 160 x 3mm transparent acrylic plate
1 x L298N Driver (H Bridge)
1 x Development board compatible with Arduino UNO 328
1 x Sensor board
1 x Set of screws and hexagonal standoffs
1 x Ultrasonic Module HC-SR04
4 x IR line tracking modules
1 x Infrared receiver
1 x IR remote control
1 x Mini breadboard
1 x Battery holder (4 x AA / not included)
1 x 9V battery holder with socket (9V / not included)
1 x Dupont wires 40 pins Female-Male
1 x Dupont wires 40 pins Male-Male
1 x USB cable (50cm)
1 x Bluetooth HC-05
1 x MCU line control module
1 x Box plus chassis assembly instructions (does not include code or electrical schematic)
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
Reviews (3) - Review moderation
Nu e un kit tutorial. Are tot ce îți trebuie ca să ai un context de dezvoltare. Diferă prinderea motoarelor față de documentație.
Am primit mai multe piese decat sunt an instrucsiunile de asamblare ,plus ca sunt cateva diferite fata de ce este an poze . As fi recunoscator daca ati putea sa ma ajutati
O experienta placuta acest chit la un pret foarte bun. Are setul complet de senzori. Instructiuni de montaj si coduri se gasesc destule. Eu am folosit aplicatia keyestudio 4wd... de pe site ul cu acelasi nume. Iti trebuie insa ceva experienta si pricepere in utulizarea programelor cu platforma Arduino. Sigmanortec este bine dotat si ofera informatii tehnice foarte bune. Sunt multumit de serviciile oferite!
