Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
DIY remote control car kit, wood, 4x4
DIY wooden kit for quick assembly of a 4x4 radio-controlled car, no soldering required, optional recommended for motor wires. Offers radio control with forward and reverse, 4x4 transmission via elastic to the front axle, powered by 4 AA batteries (not included). Instructions include pictures for each step.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
DIY wooden kit that is easily assembled in a car with a wireless remote control.
The kit does not require tinning, which is why it is suitable for any age. It is still recommended to tin the motor wires.
The car allows control by radio remote control. It can only move in the forward and backward direction. The 4x4 transmission from the engine to the wheels is made by an elastic that engages the front axle pulley. Without elastic, the car only uses the rear wheels for movement.
The car does not contain batteries. 4 AA batteries are required (2 car, 2 remote control).
The kit does not have instructions in Romanian. However, the instructions list the assembly steps with pictures for each step.
Attention, there are two types of screws in the kit, long and short.
KIT Contents:
Specifications:
Car supply voltage: 3V (2 AA batteries not included)
Remote control supply voltage: 3V (2 AA batteries not included)
Material: Wood
Car dimensions cm: 15 x 6.5 x 9cm
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
