Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
RFID Starter Kit V1, Arduino compatible
Complete Arduino RFID project kit, ideal for learning and rapid prototyping in the Arduino IDE. Includes Uno R3 board, RFID module with card and key fob, breadboard and cables for solderless assembly, plus a wide selection of sensors, displays, motors and modules such as relay, clock and remote control, to test various applications.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
RFID Learning Kit V1 compatible with Arduino. Includes a wide variety of parts to help you create different projects and especially to experiment and learn programming with the Arduino IDE.
Does NOT contain usage and/or assembly instructions.
Kit contents:
1 X Uno R3 Board
1 X USB Cable,
30 X male to male jumper Wires,
1 X 830 Breadboard,
LED red yellow green X 30 (10 pcs each),
1 Pack Resistor 220 Ω x 10, 1K Ω x 10, 10K Ω x 10,
10 X Female to male dupont wires,
1 X Potentiometer,
1 X Positive Buzzer,
1 X Active Buzzer,
1 X 74HC595,
1 X Infrared receiver,
1 X LM35 sensor,
1 X Flame Sensor,
2 X Ball Switches,
3 X Photoresistors,
4 X Key buttons,
1 X Remote control,
1 X 4-digit display tube,
1 X 8*8 Dot matrix module,
1 X 1-digit display tube,
1 X Stepper motor driver board,
1 X Stepper motor,
1 X 9g Servo,
1 X 1602 LCD,
1 X XY joystick module,
1 X Temperature module,
1 X Water test module,
1 X RFID Module,
1 X RFID keychain,
1 X RFID Card,
1 X Sound Module,
1 X Relay Module,
1 X Clock Module,
1 X 4*4 Keypad,
1 X RGB 3-color module,
1 X 9V battery snap
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].