Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
PRO MINI 5V development board
Compact board for Arduino projects with Atmega328P at 16MHz, ideal for prototyping and automation where space matters. It is programmed by external programmer via TTL-USB, powered on the RAW pin at 5-12VDC with integrated regulator, offers 14 digital pins, 8 analog and 6 PWM outputs for sensors, controls and actuators.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
PRO MINI 5V development board, compatible with Arduino IDE. The board requires a programmer to be programmed. Power is supplied to the RAW pin with approximately 12VDC voltage.
If the board cannot be rewritten, follow these steps:
- Disconnect the programmer with the Pro Mini board from the PC.
- Press and hold the RESET button.
- While holding the button, connect the board to the PC.
- Keep the button pressed and upload the code.
- When "Uploading" appears in the Arduino IDE, release the RESET button.
Specifications:
Supply voltage: 5 - 12VDC, integrated voltage regulator, only on the RAW pin
Microcontroller: Atmega328p
Processor frequency: 16MHz
Digital pins: 14
Analog pins: 8
PWM pins: 6 - D3, D5, D6, D9, D10, D11
Connection: TTL to USB
Dimensions mm: 33.3 x 18
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
Reviews (7) - Review moderation
Produs excelent. L-am folosit la un cantar pentru determinarea centrului de greutate pentru planoarele radiocomandate de clas FxJ.
Ieftin dar face treaba pentru care am cumparat
45782
Am testat aceasta placa si merge bine !
Foarte multumit de produs
