Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Power distribution board, Matek, with 5V and 12V BEC
Power distribution board for FPV drones and RC projects, with 4-layer PCB and 2oz copper for low loss and stable connections. It has dual terminals for soldering ESCs and battery, efficient DC/DC regulator with TVS protection, plus 5V and 12V stabilized BEC outputs for camera and VTX, with status LEDs and quick configuration via solder bridges.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
The Power Distribution Board (PDB) is designed for FPV drones and other RC applications, featuring an advanced 4-layer PCB design with 2oz copper for improved conductivity. It features dual terminals for soldering ESCs and battery, facilitating a solid and efficient connection. The PDB includes a high efficiency DC/DC regulator up to 95%, protected by a TVS (Transient Voltage Suppressor) for increased safety.
It offers regulated 5V and 12V outputs, making it ideal for powering FPV cameras and video transmitters (VTX), and integrated LEDs indicate correct voltage operation. It also supports flexible camera and VTX voltage configurations via solder bridges.
Specifications:
Power supply: 2S - 6S LiPo (7.2V - 26V DC)
ESC outputs: 4 x 20A (continuous), 30A (peak 10s/min)
Protection: Short circuit tolerance for 10 seconds/minute
Dimensions: 36 x 36 mm
Weight: 6g
Grip: 30.5mm x 30.5mm
Voltage regulators:
5V (3A continuous, max. 3A for 10s/min)
12V (2A continuous, max. 3A for 10s/min)
CAM & VTX voltage configuration:
3S: VCC for 12V
4-6S: Choice between 5V and 12V
Video passthrough: CAM → VTX
Use:
Solder the ESC cables to the dedicated pads (marked in pairs for stability).
Select the desired voltage by soldering to the appropriate outputs.
Connect a Lithium battery between 2S and 6S and check the output voltages.
The board attaches to the drone using the standard 30.5mm mounting holes.
Avoid short circuits and check connections before powering on.
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
