Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Metal bracket 57L, for NEMA17, 42 mm
Metal bracket for quickly mounting and fixing a Nema17 42mm stepper motor, ideal for CNC, 3D printers and automation projects. Rigid metal construction for stability and reduced vibrations, easy mounting on chassis or board, precise motor alignment, compatible with standard Nema17 screws and long-term use in technical environments.
Shipping by Thursday 22 October
Buying this product earns you 0.13 € in loyalty points.
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
The L-type metal bracket 57L holds and secures NEMA17 stepper motors (42 mm) in a horizontal position. It can be mounted on the frame of a 3D printer, a CNC machine, a robot, or any other automation project. It is made of 3 mm thick steel, with a black painted surface, which provides good rigidity and basic protection against oxidation.
The main features are the 3 mm steel construction with a painted finish and the L shape with two side stiffening ribs, which reduce flexing and vibrations during operation. The vertical plate has the standard NEMA17 pattern, with 4 holes of 3.5 mm for M3 screws, spaced 31 mm apart. The 22.1 mm center hole receives the motor centering collar. With the motor mounted, the shaft is positioned 30 - 30.5 mm above the mounting surface, which makes alignment with couplings, threaded rods, or pulleys easier.
The base has two parallel slots 4.2 mm wide, suitable for M4 screws, with a 30 mm adjustment travel. This allows the motor position to be adjusted along the shaft direction before tightening the screws.
The motor is placed on the inner side of the bracket, between the two ribs, and the shaft passes through the vertical plate. The bracket is used in projects with NEMA17 motors driven by drivers such as A4988, DRV8825, or TMC2208. These can be controlled by Arduino, ESP32, STM32, Raspberry Pi Pico boards, or by 3D printer and CNC control boards. The motor shown in the images is for illustrative purposes and is not included.
Specifications:
Model: 57L
Type: L-shaped motor bracket, horizontal mounting
Material: steel
Finish: black painted
Thickness: 3 mm
Compatibility: NEMA17 stepper motors (42 mm)
Motor mounting holes: 4 x 3.5 mm (for M3 screws)
Motor hole spacing: 31 ± 0.1 mm
Center hole diameter: 22.1 mm
Motor shaft height from base: 30 - 30.5 mm
Base mounting slots: 2 x 4.2 mm wide (for M4 screws)
Slot adjustment travel: 30 mm
Distance between slots: 30 ± 0.1 mm
Width: 50 mm
Base depth: 53 - 53.5 mm
Height: 51 - 51.5 mm
Package contents: 1 x metal bracket
Dimensions:
Usage:
Set the mounting position on the chassis or base plate and mark the screw locations, using the slots in the bracket base as a template.
Secure the bracket to the mounting surface with M4 screws and nuts, without fully tightening them.
Insert the NEMA17 motor on the inner side of the bracket, between the two ribs, so that the centering collar fits into the 22.1 mm hole and the shaft passes through the vertical plate.
Align the motor holes with the 4 holes in the plate and fasten the motor with appropriately sized M3 screws, taking into account the 3 mm plate thickness and the thread depth in the motor housing.
Tighten the motor screws in a cross pattern, evenly, without forcing the threads.
Adjust the bracket position within the 30 mm slot travel to align with the coupling, pulley, or driven mechanism. Keep in mind that the motor shaft is located 30 - 30.5 mm above the mounting surface.
Tighten the base screws firmly after adjustment.
Connect the motor to the driver used and check operation at low speed, making sure the bracket does not vibrate or move.
Periodically check screw tightness, especially in applications with vibration or frequent starts and stops.
- Material
- Metal
- Model
- 57L
- Motor frame size
- NEMA 17
- Compatible motor size
- 42 mm
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
