Hotbed arc

In Stoc

Arc hotbed based on Arc ensures uniform and stable heating of the 3D printer bed for better adhesion and reduced deformation. Compatible with adjustable heated bed, it has a compact size of 1.2 x 9.2 x 15 mm, fast thermal response, simple assembly and secure connection, suitable for intensive use in technical projects.

Ft409.28

Kapton tape 25m, 25mm

In Stoc

Kapton Tape 25m, 25mm is ideal for masking and electrical insulation in high temperature applications such as PCB protection and industrial processes. The polyimide film with silicone adhesive withstands up to 260 C long term and 300 C short term, has excellent heat and solvent resistance, minimal bake shrinkage and removes cleanly.

Ft2,183.15

Solenoid valve 12V, Water/Air, N/O, 1/2

In Stoc

Allows automatic control of water or air flow in installations, closes at 12VDC power supply being normally open. Has 1/2 connection, metal plus plastic construction and diaphragm for low viscosity liquids. Works at pressures 0.02-0.8 MPa and withstands up to 100C, offering a good flow rate in common applications.

Ft3,437.74

Connector PC6-01, Yellow, M10, 6mm

In Stoc

Pneumatic connector for quick and safe connection of PTFE tubes with 6mm outer diameter, ideal in compressed air installations and automation. It has M10 thread for easy assembly, allows the passage of 6mm tube, ensures good sealing and easy disassembly, yellow finish for quick identification in the assembly.

Ft455.86

Metal shaft 2mm, 8cm

In Stoc

Steel metal shaft, ideal for transmitting motion and guiding in fine mechanisms, suitable for DIY projects, robots or industrial assemblies. It has a diameter of 2mm and a length of 80mm, offers good resistance to wear and deformation, precise surface for stable mounting in bearings, bushings or sprockets.

Ft311.17

Connector PC4-01, Yellow, M10

In Stoc

Pneumatic connector for 4mm PTFE tube, ideal for 3D printers, especially for mounting in the E3D print head assembly with M10 thread. Ensures firm fixation of the tube by locking, the tube cannot be pushed or pulled, does not allow the tube to pass beyond the thread. Inner diameter 3mm, yellow finish for quick identification.

Ft455.86

V-Slot roller, POM, type C, 5x15x8.8mm , MR105ZZ

In Stoc

The V-Slot C type POM roller with two MR105ZZ bearings ensures smooth and precise sliding on V-slot aluminum profiles such as 2020, ideal for 3D printer axes and compact CNC systems. It has a 5mm hole, dimensions 5x15x8.8mm , silent running, low wear and good stability in repeated movements.

Ft720.45

Set of screws, spacers and nuts, M3, nylon, 300 pieces

Last items in stock

Complete kit for electronic assemblies and PCB mounting, ideal for secure fixing and spacing between boards and housings. Includes 300 pieces of M3 lightweight and insulating nylon, with screws, nuts and spacers in multiple lengths, corrosion resistant and suitable for applications where metal is not recommended. Supplied in a transparent organizer box for quick access and order.

Ft5,739.81

Ball bearing, W420, universal wheel

In Stoc

Universal ball caster wheel for robotics, ideal as a front support for 2-wheel drive platforms and 3-wheel configurations where low weight matters. The nylon support reduces friction and ensures smooth rolling with the 15 mm steel ball, it is simply fixed in two points at 40 mm, and the ball can be easily removed for cleaning and maintenance.

Ft411.26

M3 Screw Set with Spring and Nut, 3D Printer Bed

In Stoc

3D printer bed height adjustment kit, ideal for fast and stable bed leveling. Includes 40mm M3 screw, spring and knob with nut, made of stainless steel for strength and long-lasting use. M3 thread ensures easy compatibility with most platforms and fine tension adjustment.

Ft227.93

Pneumatic connector PC4-M6, CR10

In Stoc

Quick pneumatic connector for 4 mm PTFE tube, ideal for Creality Ender 3D printers and other Bowden systems with M6 threaded extruder. Ensures firm fixation of the tube and constant filament supply, easy to assemble, has a precise M6 thread, is made of brass for strength and durability.

Ft526.22

Rubber wheel, 65mm, TT compatible, white

In Stoc

The soft rubber plastic wheel for robotics offers superior grip over standard yellow wheels and improves stability and traction on various surfaces. It is an easy upgrade, compatible with the yellow motor via TT connector, has a diameter of 65mm, a width of 16mm and a white finish for clean integration into projects.

Ft662.97

Omnidirectional wheel, Mecanum, Right, 48mm

In Stoc

Allows the robot to move forward, backward and sideways, ideal for agile mobile platforms. Free-spinning diagonal rollers ensure smooth maneuverability and quick changes of direction. Diameter 48mm, thickness 25mm, TT coupling with internal diameter 5.8mm compatible with TT motor shaft, Right version for correct assembly in Mecanum set.

Ft2,211.89

Omnidirectional wheel, Mecanum, Left, 48mm

In Stoc

It provides the robot with omnidirectional movement, including sideways, thanks to the freely rotating diagonally arranged rollers. 48mm diameter and 25mm thickness for good clearance and stability, TT coupling with 5.8mm internal diameter compatible with TT motor shaft, left-side mounting option, ideal for mobile platforms and DIY chassis.

Ft2,211.89

65mm wheel with rubber

In Stoc

Ideal for DIY projects, robots, carts or spindle mechanisms, the plastic wheel with soft rubber offers smooth rolling and good grip on various surfaces. It has a total diameter of 65mm and a width of 26mm for stability, a visible 4.3mm hole for the spindle, and an M8 hexagonal cutout on the inside for secure fixation and quick assembly.

Ft1,336.85

2GT timing pulley 20 teeth, 5mm, 10mm belt

In Stoc

Ensures precise transmission of motion in timing belt mechanisms, suitable for 3D printers, CNC and automation. 2GT profile for constant pitch and reduced slippage, 20 teeth for balanced ratio, compatible with 10mm belt, 5mm bore for quick mounting on shaft.

Ft568.83

Solenoid valve 12V, Water/Air, N/C, 1/2

In Stoc

12VDC solenoid valve for water or air, normally closed, opens when voltage is applied, ideal for automation and flow control in pressure installations. 1/2 connection, metal and plastic body, operates up to 0.8MPa and 100C, diaphragm type for low viscosity liquids.

Ft2,845.13

M3 hexagon head screw set, 300 pieces, flat head

In Stoc

Set of 300 M3 screws with internal hexagon head for precise assemblies in electronics, fine mechanics and DIY projects, includes 180 flat head screws in lengths M3x5 to M3x20 with the length measured on the thread, plus 120 M3 nuts, the Allen head offers secure tightening and easy access in tight spaces, organized for quick selection and efficient assembly.

Ft6,538.55

Micro solenoid valve, 12V, NC

In Stoc

12V micro solenoid valve, normally closed, ideal for automating water, air or gas flow control in industrial projects and electronic applications. It opens only when powered for increased safety, has low consumption of 120mA, compact format for easy integration and fast switching for precise control.

Ft4,042.25

T Nut EU20 M4 aluminum profile 2020

In Stoc

M4 threaded locking element for quick and secure attachment of accessories to 2020 type aluminum profiles, inserted into the channel and ensures firm fixation without additional processing, compatible with 2020 profile and similar models, ideal for frames, 3D printers and light automation.

Ft138.74

Ball bearing N20, universal wheel

In Stoc

Metal ball mount for robots, ideal as a third support point for platforms with two drive wheels, allows smooth movement in any direction. Attaches to the chassis at two points, the 12 mm main ball rolls easily on 4 internal balls, removable construction for quick cleaning, compact dimensions 22 x 16 mm for easy integration.

Ft614.41

Ball mount CY-15A, 27mm, omnidirectional

In Stoc

Omnidirectional support with encapsulated ball, ideal as a front wheel for robots and for easy guidance of loads on tables, conveyors or platforms. Provides precise movement in any direction, smooth and silent operation thanks to support bearings, steel construction with hardened and galvanized cup for corrosion resistance, quick assembly on flat surfaces.

Ft513.33

SK8 guide axle support

In Stoc

Support for precise fixation of 8 mm guide axes in CNC applications, 3D printers and linear mechanisms. Rigid aluminum body for stability, firm screw fastening for quick assembly, constant rod alignment for smooth movement, resistant to vibration and wear in industrial use.

Ft753.15

T8 nut set, anti backlash, with spring, pitch 8mm

In Stoc

An effective upgrade for precise movements on T8 leadscrew axes, the two spring nuts compensate for play and reduce backlash, providing an affordable alternative to ball nuts, suitable for Mini CNC kits. 8 mm pitch, 4-start trapezoidal thread, brass body, 4-hole M3 mounting for stable mounting.

Ft868.11

Drone propeller set 75mm, shaft 1mm, 8520

In Stoc

Pair of propellers for drones with 8520 motor, ideal for quick replacement and restoring stability in flight. 75mm diameter for efficient traction, compatible with 1mm shaft, includes left and right propellers for correct assembly, lightweight construction for good response and low consumption.

Ft693.69

Drone propeller set 55mm, 1mm shaft, ABS

In Stoc

Providing quick replacement of propellers for drones and microprojects, the set includes a left-handed and right-handed propeller for balance and stability. Compatible with 1mm shaft motors, it has a diameter of 55mm and is made of durable, lightweight ABS suitable for efficient flight.

Ft408.29

HMC5883L 3-axis magnetometer sensor

In Stoc

3-axis magnetometer module for measuring the magnetic field and creating a digital compass in Arduino or microcontroller projects, operates at 3-5VDC, uses QMC5883L chip, communicates via IIC for quick integration, compact 18 x 13 mm format suitable for applications with limited space.

Ft2,922.43

MR72ZZ bearing

In Stoc

Miniature bearing for fine mechanisms and compact applications, encapsulated on both sides for effective protection against dust and maintaining lubrication. It has dimensions of 2 mm inside, 7 mm outside and 3 mm thick, ensures smooth rotation with low friction and good stability at high speeds, suitable for electronic equipment and precision projects.

Ft495.50

MR105ZZ bearing

In Stoc

Miniature bearing for precision applications, ideal in small motors, fans, 3D printers or fine mechanisms. It has compact dimensions of 5x10x4 mm, is shielded with ZZ metal caps for dust protection, offers smooth rolling with low friction and good stability at high speeds, the steel construction ensures durability and constant operation.

Ft217.03

Linear bearing SC8UU 8mm

In Stoc

Provides precise linear guidance for 8mm axes, ideal for 3D printers, CNC and automation mechanisms. The robust square housing allows for quick assembly, the recirculating balls provide smooth gliding and low friction, and the durable construction maintains stability and precision with repeated movements.

Ft1,116.85

2GT tensioner pulley, 5mm, without teeth, 10mm belt

In Stoc

GT2 tensioner pulley with smooth surface for tensioning and guiding 10mm 2GT belts in 3D printers and CNC mechanisms. It has bearings with an inner diameter of 5mm for mounting on common axes, is made of aluminum for strength and low weight, outer diameter 17mm with guiding edges and useful width 10mm.

Ft935.49

Set of headless screws, Allen Head, stainless steel, 200 pieces, M3-M8

In Stoc

Ideal for discreet fastenings in mechanisms, equipment and DIY projects, the set includes 200 headless screws with allen head, made of corrosion-resistant stainless steel. It covers common sizes M3-M8 for quick interventions, has a silver finish and comes in a transparent box with compartments for easy organization and access.

Ft5,804.23

Sealed ball bearing, KP-08, 8mm

In Stoc

Ideal for supporting and precisely guiding an 8mm shaft in industrial and DIY applications, this flange-type encapsulated bearing offers quick and rigid mounting, smooth and stable operation, increased dust protection due to sealing, compatibility with 42mm mounts for easy alignment in compact assemblies.

Ft870.09

Electromagnetic piston, JF-0530B, with solenoid, 12V, push-pull

In Stoc

12VDC push-pull solenoid for fast actuation in automation, ideal for gaming machines, ticket dispensers and cashier systems, offers 10 mm piston stroke and 5 N initial force, consumption approx. 18 W at 1.5 A, compact 13x15x30 mm and 35 g, designed for intermittent operation 1 s on, 1 s off for repeatability and reliability.

Ft1,996.84

Deburring Tool, Metal Handle, 11 Blades

In Stoc

Manual rotary deburring tool for the quick and precise removal of burrs and sharp edges from metal, plastic, resin, wood, or 3D-printed parts. The 360° rotating head automatically follows the working direction for good control in difficult areas, the aluminum handle provides an ergonomic grip, and the set includes 11 interchangeable steel blades for heavy-duty use.

Ft2,683.60

Nexus Omnidirectional Wheel, 100mm, 18 Rollers

In Stoc

Ideal for robotic platforms that require 360-degree movement, allowing lateral movement and rotation without changing orientation. The double construction with 18 rollers provides stability and even load distribution, a durable nylon body, and rubber rollers for good grip. The brass sleeve bearings ensure smooth and durable rolling, supporting up to 20 kg at only 295 g.

Ft15,837.01

Electromagnetic Holding Module, 10N, 5V

In Stoc

Compact solution for fastening and securing through a magnetic field, ideal for robotic prototypes and small automations. It operates directly at 3.2-5.3 V, compatible with Arduino and Raspberry Pi, offers an attraction force of up to 10 N, is easily controlled via a digital signal, and has a low consumption of approximately 200 mA for easy power supply from USB or batteries.

Ft4,121.53

Kapton tape 25m, 50mm

In Stoc

Kapton tape 25m, 50mm is ideal for PCB masking and protection, electrical insulation and fixing in high temperature areas. The polyimide film with silicone adhesive withstands up to 260 C continuous and 300 C short term, has excellent heat and solvent resistance, minimal shrinkage after baking and removes cleanly.

Ft4,219.64

Magnetic Carpet, 155x98mm, 2UUL

In Stoc

Magnetic screw mat, ideal for electronics and phone repairs, holds screws and small metal parts to prevent them from getting lost. The surface is graphically divided for quick organization and easy reassembly, wear-resistant black finish, compact size 155x98 mm for small workbenches, magnetic back for attachment to metal surfaces.

Ft2,488.38

Rubber wheel FCL-3, 31x16x18mm

In Stoc

Polymer rubber wheel for industrial and robotic applications, ensures smooth and stable rolling with reduced vibrations, offers very good grip on various surfaces including glass, is resistant to wear, oil and heat, high elasticity and 70-98 Shore A hardness support constant traction in operation.

Ft608.47

Copper Bar T2, 1.5x10x1000mm , Bus Bar

In Stoc

T2 red copper flat bar, 1.5x10x1000 mm, ideal as a bus bar for stable connections between cells in Li-ion packs, battery banks for solar panels and DIY projects. 99.9% purity for excellent conductivity and minimal voltage loss, good corrosion resistance, smooth finish for easy assembly and processing. Minimum order 4 pieces, no delivery to EasyBox.

Ft4,123.51

Bearing MR63ZZ, 3x6x2.5mm

In Stoc

Miniature bearing with ZZ metal shields for smooth rotation and dust protection, ideal for printers, quadcopters and precision mechanisms. Made of steel for strength and stability, it has compact dimensions of 3x6x2.5 mm, reduces friction and helps maintain alignment in assemblies with small parts.

Ft249.73

Out-of-Stock

Magnetic bracelet, screw holder and accessories

Out-of-Stock

Keeps screws, nails, drill bits and small metal accessories close at hand while you work, with 3 hidden neodymium magnetic zones for a secure hold. Made from durable polyester, it is adjustable and fastens firmly with Velcro, providing comfort and mobility without interrupting your work.

Ft1,740.18

Ball joint, M4, external thread, SA4T

In Stoc

SA4T ball joint with M4 external thread on the right, ideal for Delta 3D printer arms and guide rods, ensures precise movement and angle compensation in mechanisms. It is made of steel for strength, has a total length of 36mm, a thread of 21mm and an inner ball diameter of 4mm.

Ft681.80

Distance pillar 100mm, M4 thread, aluminum

In Stoc

Cylindrical aluminum spacer for stacking and fixing elements in racks or technical assemblies, length 100mm and external diameter 7mm, double M4 internal thread at both ends on about 10mm, offers precise alignment and stable support, suitable for electronics, housings and lightweight constructions.

Ft807.66

Closed HT2 belt, 144-3M, 6mm

In Stoc

Ideal for precise transmissions in mechanical projects and 3D printing, this closed HT2 belt offers stable synchronization due to the 3mm pitch and 48 teeth. Made of rubber with a fiberglass insert for tensile strength, it has a perimeter of 144mm and a width of 6mm, being compatible with the Rancher model from 3DSets.

Ft923.60

Mechanical components

Subcategories