Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Lithium-Ion BMS Module, 6S, 40A, 25.2V, with Balance
BMS for 6S Li-Ion packs, 24V nominal and 25.2V when charging, supports 40A continuously and up to 70A in peaks, offers protection on each cell against over-charging, over-discharging, over-current and short circuit, integrated balance of up to 45mA for voltage equalization and better stability over time, slim 88x34x3mm format for easy integration.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
BMS (Battery Management System) module, for Lithium Ion cells in 6S configuration (6 in series), with balance and 40A current. The maximum voltage per cell is 4.2V and the nominal total voltage of the battery pack is 24V.
This BMS offers individual protection on the inserted cells, preventing over-charging, over-discharging, over-current and short-circuit. If one of the cells goes out of the maximum voltage parameters, charging or discharging will be interrupted. It also achieves the balance between cells with a maximum current of 45mA. This balance is thought to compensate for the small voltage differences between the inserted cells which, in the long term, add up and lead to much larger differences. It is important that the inserted cells, as with any other BMS, are equal both in capacity, internal resistance and degree of wear. It is also recommended that the cells, before being inserted, be placed in parallel for at least 24 hours, in order to equalize the voltage between them.
Specifications:
Nominal voltage: 24VDC
Charging voltage: 25.2VDC (6 cells x 4.2VDC)
Compatible batteries: Lithium-Ion, with charging voltage of 4.2V per cell
Number of inserted cells: 6
Internal circuit resistance: <20mOhm
Rated current: 40A
Current in short peaks: 70A maximum
Operating temperature: -30 - +80 degrees C
Dimensions mm: 88 x 34 x 3mm
Overload detection: 4.25V
Overload protection delay: 1 second
Overload protection release: 4.15V
Cell balancing threshold: 4.125V
Balance current: 45mA
Over-discharge detection: 2.7V
Over-discharge protection delay: 1 second
Over-discharge protection release: 3V
Overcurrent voltage detection: 100mV
Overcurrent protection delay: 1 second
Over-current protection: 75A (+-5A)
Overcurrent protection release: load disconnection
Short-circuit protection condition: short on the consumer
Short-circuit detection delay: 250us
Short-circuit protection release: load disconnection
Login:
- Technology
- Lithium Ion
- Load voltage
- 25.2VDC
- sway
- Yes
- Nominal Current
- Number of cells
- 6S
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
