Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Lithium battery balancing and discharging module, 2-6S, adjustable
Module for testing, balancing and discharging 2-6S lithium batteries, ideal for quickly checking the voltage on each cell and equalizing them for correct charging. It has button settings, XH2.54 connector for balancing, works directly from the connected battery, allows adjustment of the balance voltage and discharge threshold for LiPo, LiHV, LiIon and LiFe.
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
Battery Tester Module with discharging and balancing Lithium batteries between 2S and 6S, with XH2.54 connector. Very useful to quickly check the voltage of the cells of LiPo batteries and to carry out the balance between the cells as well as to discharge the cells to the desired voltage.
The settings are made using the integrated buttons.
Balancing is achieved by bringing all cells to the voltage of the most discharged cell.
Attention: The discharge and balance function generates heat! Failure to properly ventilate the module will lead to the partial melting of the case on the back side and may also lead to its failure.
Specifications:
Module supply voltage: 1.2 - 8.5V (normally powered directly from the connected battery)
Compatible voltage: 6 - 26VDC
Compatible batteries: Lithium 2S-6S, LiPo, LiHV, LiIon, LiFe
Balance voltage setting: 2.0V - 3.9V
Discharge voltage setting: 3.0V -4.2V
Discharge current: 450mA approximately
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
Reviews (2) - Review moderation
Am cumparat acest modul de balansare si descarcare ,sunt foarte multumit,face ce trebuie sa faca ,echilibreaza bateriile sau le descarca.
Am cumparat acest Modul balans si descarcare acumulatori Litiu, 2-6S, setabil....la descarcare ok , la incarcare...nimic. Lam desfacut, lipsa toate piesele pe partea de inxcarcare. Nu se vede daca nu deconectezi cele doua placi PCB. Nu am cum sa atasez o imagine..
