Electronic clock kit, AT89C2051
zoom_out_map
chevron_left chevron_right

Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.

The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.

The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.

Electronic clock kit, AT89C2051

DIY kit for making a fully functional electronic clock with display, ideal for learning and electronics projects. It uses AT89C2051 microcontroller, operates on 6–12 V power supply, includes 90 x 70 mm PCB for quick assembly, and the firmware can be rewritten with the .bin file available at Download, using a compatible programmer.

5.58 € Tax included

4.61 € Tax excluded

(4/5) out of 16 total ratings
Read the reviews
1-2 zile
check In Stoc

Shipping by Thursday 27 August

Close

This product has a warranty of 2 years.

INTERNATIONAL DELIVERY
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
FAST DISPATCH 24H
We ship from our stock within 24H
LOYALTY POINTS
You earn points with every order, worth 5%.

DIY kit for building a fully functional electronic clock with display.

 

Specifications:

Chip: AT89C2051 (insert respecting the correct orientation, see PCB)

Power supply voltage: 6 - 12V

PCB dimensions mm: 90 x 70mm

Be careful when assembling this!!! Respect the polarities and mounting direction of the components (electrolytic capacitors, LEDs, and IC); all are marked with plus or minus signs (the IC has a crescent moon). After assembly, 3 jumpers are also required. Also be careful with the button installation.

In case you need to reprogram the AT89C2051 IC, we provide the .bin file in the Download section. You will need a programmer to write the file.

IMG_0061_jpg

IMG_0062_jpg

IMG_0063_jpg

33402

AT89C2051@DIP20 - 33402.BIN

Download (2KB)

Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.

Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.

Avertismente generale de siguranta:

Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.

Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.

Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.

Nu lasati produsul alimentat nesupravegheat in timpul testelor.

Produsul nu este jucarie si nu este destinat copiilor.

Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.

Identificare produs:

Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.

Producator / Importator / Distribuitor:

Sigmanortec S.R.L.

Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania

E-mail: [email protected]

Website: www.sigmanortec.ro

Persoana responsabila in UE:

Sigmanortec S.R.L.

Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania

E-mail: [email protected]

Documentatie si siguranta:

Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].

Customers who bought this product also bought:
Viewed products