Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
DIY electronic firefly kit, photosensitive, light tracking
DIY kit for learning soldering and basic electronics, with easy-to-assemble THT components. Assemble a small photosensitive robot that follows a flashlight through two vibrating motors, and the 5mm blue LED automatically pulses like a firefly. Includes all the necessary parts on a PVC base, 3V power supply with CR2032 battery not included.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
DIY Kit Licurici (LED Breathing Light), created especially for those who want to experiment with soldering and building simple circuits. This kit offers a captivating educational experience, being also ideal for beginners, having only THT (Through Hole Technology) components.
The circuit design is easy to assemble, and all the necessary components are included to build your own mobile robot with a blue tail light that turns on automatically, mimicking the natural behavior of fireflies.
The kit is not just a simple component soldering project, but a perfect educational tool to learn the basic principles of electronics and soldering. The resulting robot has two vibrating motors and two photoresistors. When pointing a flashlight at it, through the alternating vibration of the legs, the robot will orient itself towards the light source.
It is necessary to be powered by a CR2032 battery ( not included ).
Specifications:
Base material: PVC sheet
Supply voltage: DC 3V
Battery type: CR2032 (battery NOT included)
Detection device: Photosensor (photoresistor)
Tail LED: 5 mm blue LED
Instructions for use:
Assemble the components on the PVC base according to the diagram and the indications directly on the PCB, paying particular attention to the polarity and the mounting direction of the IC (see the crescent).
Use a soldering gun to fix the electrical components.
Insert the CR2032 battery for power and check if the circuit works correctly.
The photosensitive sensor will detect the light, and the tail LED will start to pulse automatically, imitating the effect of a firefly's breathing.
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
