Development Board

Ultra-compact board for IoT projects and wearable devices, featuring ESP32-C3 on 32-bit RISC-V at 160 MHz for fast response. It offers WiFi 802.11 b/g/n and Bluetooth 5 LE connectivity, power and simple programming via USB-C with 5V to 3.3V regulator, plus 11 GPIO PWM and ADC inputs for sensors and actuators.

Ideal for prototyping and rapid development of IoT projects, the board with the ESP32-WROOM-32D module offers WiFi and Bluetooth connectivity, programming and power supply via Type-C with integrated CP2102, easy access to pins through side headers and breadboard compatibility, while the EN and BOOT buttons simplify resetting and firmware uploading.

Versatile solution for IoT and automation projects, with integrated 2.4 GHz WiFi and Bluetooth BLE for fast connection to network and devices. Offers dual-core processor up to 240 MHz and 4 MB flash for complex applications, simple programming via USB-C with CH340C. Compatible with Arduino IDE, MicroPython and Lua, includes SPI, I2C and UART interfaces for sensors and modules.

The ESP32-S3 development board with 1.47 inch LCD display is ideal for IoT prototypes and compact graphical interfaces, offering a dual core processor up to 240 MHz, WiFi and Bluetooth 5 connectivity, ST7789 screen with fluid display and Micro SD slot for storage, fast programming via USB and Arduino IDE and ESP-IDF compatibility.

The all-in-one IoT platform for autonomous and mobile projects combines 4G Cat-1 with WiFi and Bluetooth for fast cloud connectivity, includes multi-system GNSS for precise tracking, supports OV camera for capture and streaming, has flexible power supply via USB, 18650 battery or solar panel with integrated charging.

Smart board for IoT and embedded projects with video monitoring and motion detection, based on ESP32-S3 dual core with Wi-Fi and Bluetooth. Integrates OV2640 2MP HD camera, 0.96 OLED screen for status display, microphone for audio capture and PIR sensor for quick triggering. Ideal for automation, surveillance, notifications and rapid prototyping.

ESP32-C6 development board for IoT projects and graphical interfaces, with RISC-V processor up to 160 MHz, 1.47 color LCD screen controlled by ST7789 for fluid UI, WiFi 6 and Bluetooth 5 connectivity for quick integration, Micro SD slot for files and RGB LED for signaling. Arduino IDE and LVGL compatible.

Compact board for DIY projects and rapid prototyping, with RP2040 compatible dual core Cortex-M0+ chip at 133MHz, 2MB Flash and 264KB SRAM for stable embedded applications. Offers flexible connectivity via GPIO, PWM, I2C, UART and SPI, easy programming via USB-C drag and drop, plus integrated WS2812 RGB LED for visual feedback in small and wearable projects.

Integrated solution for IoT projects with 4G connectivity and external load control, based on STM32F103 and Air780E LTE Cat.1 bis module with AT firmware and low idle power consumption. Includes two 5V relays controlled from PA4 and PA5, flip-up Nano SIM slot with 4G antenna and network status LED. Simple 5V power supply via USB Type-C or KF128 terminal, easy programming via SWD or USART.

Ultra-compact IoT solution for portable projects and smart home, offering modern connectivity with Wi-Fi 6, Bluetooth 5, Zigbee 3.0, and Matter for interoperable integration. Based on the ESP32-C6 with a RISC-V processor up to 160 MHz and 4MB Flash, it includes USB-C and UART, I2C, SPI interfaces for quick connection to sensors and modules, plus integrated charging for Li-Po batteries.

Compact solution for IoT projects, robotics, and interactive light effects, with ESP32-S3 dual-core 240 MHz and Wi-Fi plus Bluetooth 5 LE Mesh connectivity. It integrates an 8x8 RGB matrix with addressable WS2812 LEDs for animations and displays, a 6-DOF QMI8658 IMU for motion and orientation detection, easy power supply and programming via USB-C, extendable through Dout pin and 17 multifunctional GPIOs.

Compact solution for voice assistant projects with display, based on ESP32-S3, offers Wi-Fi and Bluetooth for quick integration into smart home and prototypes, includes ES8311 audio codec with integrated microphone and speaker output, displays the conversation and status on a 1.54-inch color LCD screen, supports switching between AI models such as Qwen, DeepSeek, and Doubao via xiaozhi.me, and is easy to program via USB-C.

DIN module for automating equipment with remote control, simultaneously controls up to 8 IR devices through independent channels and quickly learns codes with the built-in IR receiver. It integrates automatically into Home Assistant via MQTT, offers stable connectivity via WiFi or Ethernet, and is powered directly at 9-24 VDC, with USB-C for programming and backup.

Compact solution for projects with AI voice assistant and display, based on a dual-core ESP32-S3 at 240 MHz with 16MB Flash and 8MB PSRAM for fast response. Includes a 1.54" LCD, integrated microphone, and ES8311 audio codec for natural conversations with an external speaker. Offers 2.4 GHz Wi-Fi and Bluetooth 5 LE, and can be easily programmed via USB-C in Arduino IDE, ESP-IDF, or MicroPython.

Compact development board for embedded projects and rapid prototyping, with RP2350A dual-core selectable Arm Cortex-M33 or RISC-V up to 150 MHz, 520 KB SRAM and 4 MB flash, 26 GPIO with SPI I2C UART ADC PWM and PIO for custom protocols. USB Type-C for programming and power, Li-Ion battery support with integrated charging for portable applications.

The ultra-compact development board for projects where space matters can be soldered directly onto a PCB thanks to its castellated edges. It includes the RP2350A with a choice between Arm Cortex-M33 or RISC-V up to 150 MHz, 4 MB Flash and 520 KB SRAM, 29 GPIO with SPI, I2C, UART, ADC, PWM, and PIO for custom protocols. Simple programming via USB Type-C, plus an integrated WS2812 RGB LED.

Development board with ESP32-S3 and a 2.8-inch round capacitive touchscreen, 480x480, ideal for HMI interfaces, dashboard panels, and IoT projects with a compact display. It offers 2.4GHz WiFi and Bluetooth 5, generous 16MB Flash and 8MB PSRAM for smooth graphics with LVGL, includes microSD, RTC, and a 6-axis IMU sensor, and supports easy programming via USB-C.

Compact WiFi module with ESP8285H16 that adds remote control and real-time monitoring to Sinilink programmable power supplies, mounts directly on the board via a dedicated connector, communicates via 3.3V UART with a ModBUS bridge for commands and telemetry, operates at 3.3-5V with internal regulation, and supports advanced integration through alternative firmware such as ESPHome or Tasmota.