Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
DC-DC converter S09, automatic buck-boost, 2.5–15V to 5V, 600mA
Automatic buck-boost DC-DC converter S09, with 2.5 - 15 VDC input and fixed 5 VDC output, ideal for stable power supply of 5 V modules from batteries or automotive sources with variable voltage. It provides up to 600 mA output, 1.2 MHz switching frequency, quiescent current below 200 uA, and an EN pin for external turn-on or turn-off, in a compact SMD or 2.54 mm pin-mountable format.
Shipping by Thursday 22 October
Buying this product earns you 0.07 € in loyalty points.
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
The S09 module is an automatic DC-DC buck-boost converter that maintains a fixed 5 VDC output regardless of whether the input voltage is higher or lower than that value. It is a compact solution for stable power supply of 5 VDC loads from variable-voltage sources, such as Li-ion batteries, NiMH batteries, or automotive supplies, and is suitable for communication modules, digital radios, development boards, model aircraft, automotive equipment, and battery-powered monitoring systems.
The circuit automatically switches between boost mode when the input voltage drops below 5 V and buck mode when it rises above 5 V, without user intervention. The module accepts an input voltage between 2.5 and 15 VDC and operates at a switching frequency of up to 1.2 MHz, with a quiescent current below 200 uA, making it suitable for long-term battery-powered applications. The board has a dedicated EN pin, through which the module can be turned on or off externally, separate from the input supply.
Among the main features are the two switching inductors, the rectifier diode, the control integrated circuit, and the 5 solder pads (VIN+, VIN-, EN, VOUT+, VOUT-) used for both power input and load connection, with the module able to be mounted by direct SMD soldering onto the PCB or on 2.54 mm pitch pins.
With its fixed 5 VDC output, the module is compatible as a power source for boards such as Arduino, ESP32, STM32, and Raspberry Pi, as well as for modules and sensors designed to operate at 5 V, when powered from a battery or from a variable-voltage supply.
Specifications:
Input voltage: 2.5 - 15 VDC
Maximum output current: 600 mA
Converter type: automatic DC-DC buck-boost
Output voltage: fixed 5 VDC
Output accuracy: +/- 0.1 V
Switching frequency: up to 1.2 MHz
Quiescent current: below 200 uA
Efficiency: up to 75%
Output ripple: below 50 mV
EN pin: activation at 3 - 15 V, off at low level or unconnected
Isolation: non-galvanically isolated
Mounting: SMD or on 2.54 mm pitch pins
Operating temperature: -20 to 85 °C
Dimensions: 19 x 14 x 4 mm
Pinout:
| Connector | Pin | Function |
|---|---|---|
| S09 board | VIN+ | Positive power input, 2.5 - 15 VDC |
| S09 board | VIN- | Input ground (GND) |
| S09 board | EN | Module enable / disable |
| S09 board | VOUT+ | Stabilized positive 5 VDC output |
| S09 board | VOUT- | Output ground (GND) |
| EN | Module state |
|---|---|
| 3 - 15 V (usually connected directly to VIN+) | Module active, continuous operation |
| Low level or unconnected | Module off, output disabled |
Use:
Connect the power supply with a voltage between 2.5 and 15 VDC to the VIN+ and VIN- pins, observing polarity.
For continuous operation, connect the EN pin directly to VIN+, so the module starts automatically when power is applied.
If you want external control, leave EN unconnected or pull it low to turn off the module, and apply 3 - 15 V to EN to turn it back on.
Connect the 5 VDC load to the VOUT+ and VOUT- pins, without exceeding the maximum current of 600 mA.
Keep in mind that at low input voltages, when the module operates in boost mode, the input current drawn is higher than the output current delivered.
Before mounting, check that the ordered module version is the 5 V version, marked on the back of the board, because the same S09 model is also produced in 3.3 V, 9 V, or 12 V variants with different fixed outputs.
Mount the module by direct SMD soldering onto the PCB or on 2.54 mm pitch pins, depending on the space available in your project.
For stable results in battery-powered applications, take into account the quiescent current below 200 uA and the output ripple below 50 mV when powering noise-sensitive circuits.
Dimensions diagram:
- Supply Voltage
- 2.5
- Source Type
- Automatic
- Voltage Adjustment
- Not
- Adjustment Type
- Fixed
- Output Voltage
- 5 V
- Input Voltage Type
- “DC” in Romanian can mean **“de ce”**, which translates to **“why”** in English.
- Output Voltage Type
- “DC” in Romanian can mean **“de ce”**, which translates to **“why”** in English.
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
