Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
DB25 Connector Module
Quick solution for connecting cables to a DB25 connector without soldering, each pin has a metal terminal with a screw for secure fastening and stable contact. The insulating PCB provides solid mounting support and individual access to pins for prototyping and testing. Compatible with RS232, parallel port, and other D-SUB 25 interfaces, ideal for Arduino, STM32, or ESP32 projects.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
This breakout module allows quick and solderless connection of cables to a DB25 connector (D-SUB type with 25 pins). It is ideal for prototyping, testing, or integration in projects requiring RS232, VGA interface, or other applications using 25-pin D-SUB connectors.
Specifications:
Connector type: DB25 (D-SUB, 25 pins)
Mounting type: Solderless (screw terminal)
Material: PCB with insulating layer, metal terminals
Number of pins: 25
Compatibility: RS232, VGA, parallel, other D-SUB 25 interfaces
Pinout:
| Pin number | Pin description |
|---|---|
| 1 | Protective ground |
| 2 | Transmit data |
| 3 | Receive data |
| 4 | Request to send |
| 5 | Clear to send |
| 6 | Data set ready |
| 7 | Signal ground |
| 8 | Data terminal ready |
| 9 | Data carrier detect |
| 10 | Test pin |
| 11 | N/A |
| 12 | Data carrier detect (2) |
| 13 | Clear to send (2) |
| 14 | Transmit data (2) |
| 15 | Transmitter clock (DCE) |
| 16 | Receive data (2) |
| 17 | Receiver clock |
| 18 | N/A |
| 19 | Request to send (2) |
| 20 | Data terminal ready |
| 21 | Signal quality detector |
| 22 | Ring indicator |
| 23 | Data signal rate detector |
| 24 | Transmitter clock (DTE) |
| 25 | N/A |
Usage:
Loosen the terminal screw corresponding to the desired pin, insert the wire end, and tighten the screw to firmly secure the connection. Then, insert the DB25 connector into the equipment port (computer, controller, etc.).
Attention! This module does not provide additional protection (no diodes, resistors). It is only a mechanical intermediary.
Dimension diagram:
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
