Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
CAN communication module, SN65HVD230, 3.3V
CAN communication module for 3.3V projects, also compatible with 5V via level converter, ideal in environments with high interference. Offers reliable transmission and reception up to 1 Mb/s, is ISO11898 compliant for easy integration into automotive and industrial CAN networks, allows expansion up to 120 nodes and includes low-power standby mode.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
CAN communication module, SN65HVD230, compatible with development boards on 3.3V (or 5V with a logic level converter), designed to be used in environments with high interference, offering robust capabilities of transmitting and receiving signals at various rates transfer. This device ensures reliable and efficient communications in vehicle networks and other industrial applications that require a CAN communication protocol.
The module complies with ISO11898 standards, ensuring compatibility with most CAN networks.
It allows the connection of up to 120 nodes in a network, facilitating the expansion and scalability of the system, thanks to the high input impedance.
It can be used in standby mode, with typical consumption of only 370µA, optimizing battery life in battery-powered applications.
It supports transfer rates up to 1 Mb/s, allowing fast and efficient communications.
It offers integrated functions to protect the device in abnormal operating conditions.
It is equipped with protection functions against momentary interference and slope control to reduce radio interference (RFI) and Differential Receiver to eliminate common and electromagnetic interference (EMI), improving the reliability of communications.
The SN65HVD230 module offers three different operating modes: high speed, ramp and standby. The control of these modes is realized through the Rs pin, which, when configured with a variable resistance (0 ~ 100kΩ potentiometer), allows easy selection of the desired mode through a simple hardware configuration.
The typical diagram of a CAN application with the SN65HVD230 illustrates how the CAN controller connects to the Tx output pin of the SN65HVD230 to send data to the CAN network, and the Rx receive pins of the CAN controller are coupled to the R output pin of the SN65HVD230 to receive data. This configuration facilitates the simple integration of the module in CAN systems, allowing the efficient transmission and reception of data in the network.
Specifications:
Supply Voltage: 3.3VDC
Current in Standby Mode: Typical 370µA
Maximum Transfer Rate: Up to 1 Mb/s
Thermal Protection: Yes, includes the thermal shutdown function (TSD)
Opening Safety Function: Yes
Protection against Momentary Interference: Yes
Slope Control: Yes, to reduce radio interference (RFI)
Resistance to Common Interference and EMI: Yes, the differential receiver supports a wide range of interference
Compatibility: Fully compliant with ISO11898 standards
High Input Impedance: Allows the connection of up to 120 nodes
Dimensions mm: 16 x 14.5mm
Pinouts:
TX -> CTX Development Board on SN65HVD230
RX <- CRX Development Board on SN65HVD230
Development Board 3.3V -> 3V3 on SN65HVD230
Development Board GND -> GND on SN65HVD230
CAN H -> CAN H network on SN65HVD230
CAN L -> CAN L network on SN65HVD230
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
