Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
BMS module 3S, 12.6V, 15A
The BMS board for 3S lithium packs offers complete charge and discharge protection for 12.6V batteries made of 3 18650 cells. It provides overcharge limitation 4.25-4.35V per cell and overdischarge shutdown 2.3-3.0V , supports operating current up to 15A and has a compact size of 51x23x4 mm for easy integration into projects.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
BMS board HX-3S-FL20 Rev.2.2, offers charge/discharge protection for lithium cells in 3S configuration, total voltage 12.6V (charged). Ideal for batteries composed of 3 cells type 18650.
Specifications:
Battery charging voltage: 12.6VDC
Overload protection per cell: 4.25 - 4.35V
Overdischarge protection per cell: 2.3 - 3.0V
Maximum operating current: 15A
Internal resistance: <150mAh
Dimensions mm: 51 x 23 x 4
Battery connection method:
- Technology
- Lithium Ion
- Load voltage
- 12.6VDC
- sway
- Not
- Nominal Current
- Number of cells
- 3S
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
Reviews (3) - Review moderation
Calitate ok
Am reconditionat un acumulator de 12 V de la o masina de insurubat Bosch montand 3 celule 18650 de 2 Ah si modulul functioneaza ok dar nu suporta tensiuni de alimentare peste 12.8 V, asa ca a trebuit sa folosesc un alt alimentator in locul celui original Bosch. Curentul cerut de motorul MG in sarcina extrema e in jur de 7-8 Amperi. Daca modulul ar rezista in timp, ar fi minunat. Ii acord 5 stele.
Ok ! 5*****
