Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Battery charging module, TP4056, 6 channels, parallel, 5V, 1A
Practical solution for simultaneous charging of up to 6 Li-Ion batteries, with 6 independent channels on TP4056 powered at 5V. Offers up to 1A per channel, channels can be used in parallel for higher total current, and the LEDs simply indicate the status, red when charging and green when fully charged. Ideal for 18650 cells and DIY projects.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
Lithium battery charging module that uses TP4056 integrated circuits (6 ICs) and allows simultaneous charging of up to 6 lithium batteries, providing a solution for charging multiple individual cells.
Each channel supports a maximum current of 1A, and the modules are connected in parallel to obtain a total output of up to 6A.
The LED indicator facilitates use, showing the charging status: red during charging and green when the battery is fully charged.
The module is ideal for DIY projects or systems that require efficient charging management of multiple batteries.
Used with 18650 cells, the plastic 18650 holders are ideal for staying permanently connected.
Attention! Modules cannot be inserted. Each output has a dedicated TP4056.
Specifications:
Input voltage: 5VDC (overvoltage may damage the module)
IC: TP4056, 6 in parallel
Output voltage: 4.2V (±1%) (to battery)
Output current: 1A per channel (up to 6A in parallel)
Status indicator: Red LED while charging, green LED when fully charged
Dimensions: 40 x 67 x 10mm
Use:
Use a 5V and minimum 6A transformer for power supply. Attention, the required input voltage is 5VDC and must not exceed 6V. DO NOT POWER WITH REVERSE POLARITY! The module will burn out, as it is not protected against polarity.
Connect the batteries to the dedicated terminals, paying MAXIMUM attention to POLARITY . The red LED indicates charging, and the green LED signals full charge.
Avoid reversing the polarity of the batteries and the output circuit to prevent damage to the chip.
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
