Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Arduino Nano V3.0 compatible development board, ATMega328P-AU, FT232
Compact board for projects with ATmega328P, ideal when you need more analog inputs, offers 8 analog channels and 14 digital pins with 6 PWM, stable USB communication via FT232 and easy programming in Arduino IDE via mini USB, operates at 5 V and can also be powered by VIN 5-12 V for mobile assemblies and rapid prototyping.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
Development board compatible with Arduino, NANO V3, ATmega328p. This board uses the same microcontroller used in the UNO boards, having the advantage of small dimensions and the presence of two analog inputs in addition to it. The characteristic of the total 8 analog pins (compared to 6 on the UNO) make this board the ideal choice in line-following robots that use 8 analog channels.
The difference between this board and its cheaper version, available on the site, is the use of the FT232 integrated.
The programming of the board is usually done through the Arduino IDE software, as a MiniUSB cable is required for communication with the computer.
The board is programmed with the "old bootloader" setting (it may vary depending on the batch).
The board can be powered directly at 5V through the USB port or on the VIN with a voltage between 5 and 12V (uses the AMS1117 5V voltage regulator).
Specifications:
Microcontroller: ATmega328p
USB converter: FT232
Operating voltage: 5 V
Input voltage (recommended): 8-12 V
Digital I/O pins: 14 (of which 6 PWM output pins)
Analog input pins: 8
Connection: mini USB
DC current on I/O pin: 40 mA
FLASH memory: 32 KB (ATmega328p)
Clock speed: 16 MHz
Dimensions mm: 43.2 x 17.8mm
Comparison between specifications:
Instructions:
To program the board, it is necessary to install the CH340 driver (see associated files).
The board comes with a preloaded bootloader. We prefer for the moment to use the old bootloader (before loading the code, select "ATMega328p old bootloader".
YOU CAN ORDER A MAXIMUM OF 4 PIECES PER ORDER. FOR LARGER QUANTITIES, PLEASE USE THE CONTACT PAGE.
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
Reviews (5) - Review moderation
Foarte bun raport pret calitate!
Super
ok
preturi bune,servicii excelente,timp de livrare f.scurt.
Ok
