Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
12V relay module with light sensor
Automates the start of a consumer depending on the ambient light, the switching threshold is adjusted from the integrated potentiometer. It is powered at 12VDC via VIN and GND, controls AC or DC loads via NC, COM, NO contacts. 10A relay for 250VAC or 30VDC, activation when the set light level is exceeded and deactivation below the threshold.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
12V relay module with built-in light sensor.
The module can activate a load depending on the light intensity, with the relay activation sensitivity adjusted by the potentiometer integrated on it. The relay can be used with AC or DC loads (the module is powered only by 12V DC). The module is powered with 12VDC through the pins marked VIN and GND.
The relay is activated when the amount of light falling on the photoresistor exceeds the limit set by the potentiometer. When the light is weaker than the set limit, the relay is deactivated.
Specifications:
Supply voltage: 12VDC
Supported load: AC 250V/10A, DC 30V/10A
Logic voltage: 12VDC
Relay pins: NC, COM, NO
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
Reviews (4) - Review moderation
Modul f. bun si stabil.
corect
Bun
Nu sunt la prima comanda pe acest site,am revenit mereu cu o noua comanda deoarece fiecare client revine acolo unde este servit corect,la timp si cu produse compatibile cu proiectul pe care doreste sa-l realizeze.
