Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Resistor Box, 0-9999 Ohm, with potentiometers
Variable resistor box for quick setting of a resistance between 0 and 9999 Ohm, with 1 Ohm step, ideal for laboratory, education and testing of DC circuits. Adjustment in decades with selectors X1, X10, X100 and X1000 for exact choice of value, recommended power 0.5 W, compact plastic construction, minimum resistance below 0.035 Ohm.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
Variable resistor box that allows obtaining an adjustable resistance between 0 and 9999 Ohm, in steps of 1 Ohm. It can be used for educational purposes or to test a specific resistance in a DC circuit.
Careful! It is not a power resistor. The supported current is quite small. The maximum recommended power is 0.5W.
The adjustment is done in decades, using multipliers. Each selector controls one decimal place of the desired value.
Specifications:
Resistance range: 0 - 9999Ohm
Steps: 1 Ohm
Nominal power resistance: 0.5W
Resistance value 0: <0.035 ohm="" p="">
Adjustment zones: X1, X10, X100, X1000
Material: Plastic
Dimensions mm: 140 x 100 x 50mm
Example of use:
It is desired to set the resistance to the value of 7351 Ohms. Set the multiplier x1000 in position 7, x100 in position 3, x10 in position 5, x1 in position 1.
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
