Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Pro Micro development board, 5V, ATmega32U4, MicroUSB
Compact Arduino project board with native USB interface, ideal for automation, HID keyboards and rapid prototyping. Based on ATmega32U4 at 16MHz, it offers 5V power supply via USB or VCC and 6-9V on RAW, 12 digital pins with 5 PWM and 4 analog inputs. Compatible with Arduino IDE by selecting the Leonardo board.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
The ProMicro 5V/16MHz development board, compatible with Arduino, is a development board similar to the Pro Mini board, with the difference that it incorporates the ATmega32U4 microcontroller and the presence of the MicroUSB connector.
CAREFUL! DEPENDING ON THE BATCH, THE CONNECTOR CAN BE MINIUSB OR MICROUSB. CONTACT US TO BE SURE OF THE CONNECTOR PRESENT ON THE BOARD IN YOUR ORDER.
The power supply can be carried out on the RAW pin with a maximum voltage of 12V (recommended 7V). Do not feed on the VCC pin if you do not have a constant 5V source.
The board is programmed with the Arduino IDE (not mandatory), where you choose the Leonardo board and the respective COM.
You can read here details about installing the driver .
Specifications:
Supply voltage: 5V (VCC or USB pin) - 6-9V (RAW pin)
Memory: 32KB
Digital I/O Pins: 12
PWM pins: 5
Analog I/O Pins: 4
Current per I/O: max 40mA
Frequency: 16MHz
EEPROM memory: 1KB
SRAM: 2.5KB
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
Reviews (4) - Review moderation
Foarte multumit
Produs conform descrierii
Este comparabila cu clasica placa Arduino Uno ca performanae dar mult mai mica.
A trecut toate probele de functionare.
