Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
MPPT+PWM Solar Controller Module, 60A, 12-48V, SY6048
It efficiently controls the charging of photovoltaic systems, using MPPT tracking with over 99% efficiency to maximize the energy of the panels. It automatically supports 12-48V and 60A charging current, is compatible with Seal, GEL, Flooded and LiFePO4 batteries, displays parameters on the illuminated LCD and offers 7 working modes plus 2 5V USB ports for powering devices.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
SY6048 60A MPPT+PWM solar controller, designed to work with solar panels between 15 and 90V depending on battery voltage, providing increased efficiency in managing solar energy.
It uses Maximum Power Point Tracking (MPPT) technology, ensuring tracking efficiency of over 99%, extracting the greatest possible amount of energy from solar panels. It is compatible with Seal, GEL, Flooded and LiFePO4 batteries and allows automatic identification of battery voltage (12V/24V/36V/48V).
The backlit LCD screen provides a clear view of operating parameters, such as battery voltage, charge and discharge current, operating temperature and active mode. It allows the selection of one of 7 operating modes, adaptable depending on the usage scenario – from automatic light control to manual or timed control.
The controller offers complete protection against overvoltage, overcurrent and overheating, making it a reliable solution. It includes two 5V USB ports for charging mobile devices directly from the solar system.
The charge and discharge termination voltages can be set individually in manual mode.
Connect the battery to the controller before connecting the solar panel.
Connection order: 1. Charged battery - 2. Solar panel - 3. Consumer
Disconnection order: 1. Consumer - 2. Solar Panel - 3. Battery
Specifications:
Model: SY6048
Type: MPPT+PWM
Battery voltage: 12V/24V/36V/48V (automatic identification)
Charging current: 60A
Maximum PV panel power:
720W (12V) | 15-23V
1440W (24V) | 30-45V
2160W (36V) | 45-69V
2880W (48V) | 60-90V
Battery compatibility: Seal, GEL, Flooded, LiFePO4
Integrated protections: Overvoltage, overcurrent, temperature
Interface: LCD with backlight
USB ports: 2 x 5V
Working modes: 7 predefined modes for intelligent management
Material: Plastic Case
Working modes:
| No. | Working method | Description |
|---|---|---|
| 1 | Permanent charging mode | The controller charges the battery and does not allow it to discharge , regardless of conditions. |
| 2 | Light-based control | The download starts 10 minutes after sunset and stops 10 minutes after sunrise . |
| 3 | Light control + timing | The download starts after sunset (with a 10 min delay) and stops after a preset time (max. 23:59) . |
| 4 | Universal control | The download is continuous , as long as no errors or system problems occur. |
| 5 | Manual control | The user manually controls the start/stop of the download with the "▼" button. |
| 6 | Timed control | The download is controlled by a schedule , with start/stop at preset times. |
| 7 | Test mode | Similar to mode 3, but without the 10 minute delay – ideal for quick tests . |
Power table:
| Battery voltage | Maximum PV power | Recommended Voc Voltage PV |
|---|---|---|
| 12V | 720W | 15V – 23V |
| 24V | 1440W | 30V – 45V |
| 36V | 2160W | 45V – 69V |
| 48V | 2880W | 60V – 90V |
VoC is the open circuit voltage. PV is the solar panel.
Use:
Connect the battery to the controller before connecting the solar panel.
Connection order: 1. Charged battery - 2. Solar panel - 3. Consumer
Disconnection order: 1. Consumer - 2. Solar Panel - 3. Battery
Example of use in mode 3 (Light) with 12V GEL battery and solar panel up to 23V (measured in empty):
First connect the 12V battery to the controller (BAT+ and BAT- ports).
Then connect the solar panel to the PV+ and PV- input.
Finally, connect the consumer (e.g. LED bulb) to the discharge port (LOAD+ and LOAD-).
The LCD screen will turn on automatically.
The controller automatically detects the 12V voltage.
Access the settings menu:
Press the "OK" button to enter the menu.
Navigate using the "▲" and "▼" arrows.
Set the battery type (ex: GEL):
Select the "Battery Type" option and choose the correct type (ex: GEL).
Choose the working mode (Mode 3):
Look for the "Work Mode" option and select "Mode 3" (Light + Time Delay Control).
Set the download duration (timer):
In the "Load Time" menu, set the desired time, for example: 05:00 for 5 hours.
Save and return to the main screen:
Long press "OK" or exit the menu to save the settings.
Result:
The controller will detect sunset, after 10 minutes, it will start discharging and keep the light on for 5 hours. After 5 hours, the discharging will stop automatically.
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
