ATtiny85 USB development board compatible with Digispark
ATTINY85 development board, integrated USB
In Stoc
Digispark compatible development board with ATtiny85 and integrated USB is ideal for compact automation projects, LED control and simple actuators. It is quickly programmed from the Arduino IDE, powered directly from 5V via USB, includes stable regulator and status LED for testing. It offers 6 digital IO pins, with 3 PWM, and 4 analog inputs for easy sensor connection.
5.66 €
Cortex ARM STM32F030F4P6 Development Board
Out-of-Stock
Cortex ARM Development Board STM32F030F4P6
Out-of-Stock
Development board with 32-bit ARM Cortex-M0 CPU, ideal for learning and rapid prototyping in embedded projects. Powered at 5V via MicroUSB with conversion to 3.3V via AMS1117, runs at 48MHz for responsive applications, offers programming and debugging via ISP or SWD, includes sample source code for easy starting.
4.79 €
D1 MH-ET MiniKit development board, ESP32, WiFi + Bluetooth
D1 MH-ET MiniKit development board, ESP32, WiFi + Bluetooth 4.2, ESP8266
In Stoc
Compact board for IoT prototyping and automation, with ESP32-WROOM-32 dual core and 2.4GHz WiFi connectivity plus Bluetooth 4.2 BLE for fast communication. Wemos D1 Mini format, compatible with D1 shields on the white pin row, 5V power supply with 3.3V logic, 4MB Flash and 530KB SRAM, antenna integrated into the PCB for easy installation.
8.84 €
LilyPad 328p ATmega328p 5V development board
LilyPad 328p development board
In Stoc
The ideal board for wearables projects, it is easy to sew into clothes thanks to the large holes for the conductive wire. It uses the ATmega328p as on the Uno R3, runs at 8MHz and supports 3-5V power supply. It offers 14 digital, 6 analog and 6 PWM pins for sensors and actuators, includes a Reset button and has a slim 50mm round format.
12.08 €
Sensor Shield V5.0 expansion board for Arduino UNO
Sensor shield V5.0 expansion board
In Stoc
It mounts directly on the UNO development board and simplifies the quick connection of sensors and servos, providing pins organized by channels for signal, VCC and GND, includes separate 2-pin power connector for VCC and GND, reduces wiring and the risk of wrong connection, ideal for prototyping and educational projects.
2.16 €
Lua NodeMCU ESP8266 CH340G WiFi development board
Lua Wifi NodeMCU development board, CH340G, ESP8266
In Stoc
Development board for IoT projects with integrated WiFi, based on ESP8266 and Lua firmware, compatible with Arduino IDE for rapid programming. Offers 802.11 b/g/n 2.4GHz connectivity, 4MB Flash, GPIO PWM I2C SPI and ADC interfaces for sensors and actuators, stable serial communication via CH340G, flexible power supply through Type-C or Vin.
4.94 €
Arduino Mega 2560 R3 development board with ATmega2560 microcontroller, USB Type-C and CH340 driver
Out-of-Stock
Mega 2560 R3 development board, CH340, Arduino compatible
Out-of-Stock
Ideal for complex projects and prototyping, this Arduino-compatible board uses the ATmega2560 and CH340 USB interface, offers 54 digital pins with 14 PWM and 16 analog inputs, runs at 5V with a 16 MHz clock, has 256 KB Flash memory and stable connection for rapid development. Limited to 4 pieces per order.
23.98 €
NANO v3 ATmega328p Arduino-compatible dev board
NANO v3 AtMega 328p development board, Arduino compatible
In Stoc
Ideal for prototyping and compact projects, especially line-following robots with 8 sensors, it uses the ATmega328p like the UNO but in a reduced format. It offers 14 digital pins with 6 PWM and 8 analog inputs, is quickly programmed in the Arduino IDE via mini USB, has a CH340G USB converter and can be powered at 5V via USB or via VIN 5-12V.
5.16 €
NANO v3 AtMega 328p development board, Arduino compatible
Out-of-Stock
NANO v3 AtMega 328p development board, Arduino compatible, unsoldered pins
Out-of-Stock
Ideal for rapid prototyping and compact electronics projects, the ATmega328p board offers Arduino compatibility, simple mini USB connection with CH340G, 5V operation and 16MHz frequency for stable execution. It has 14 digital pins, including 6 PWM, and 8 analog inputs, suitable for sensors, automation and motor control. The pins are solderless for flexible mounting.
5.20 €
Pro Micro 5V ATmega32U4 development board
Pro Micro development board, 5V, ATmega32U4, MicroUSB
In Stoc
Compact Arduino project board with native USB interface, ideal for automation, HID keyboards and rapid prototyping. Based on ATmega32U4 at 16MHz, it offers 5V power supply via USB or VCC and 6-9V on RAW, 12 digital pins with 5 PWM and 4 analog inputs. Compatible with Arduino IDE by selecting the Leonardo board.
9.46 €
Pro Mini 3.3V ATmega328P development board
PRO MINI 3.3V development board
In Stoc
Ideal for compact and low-power projects, this ATmega328P board runs at 3.3V and 8MHz, is programmed from the Arduino IDE via a TTL-USB adapter, has 14 digital and 8 analog pins for fast interfacing, and is powered on the RAW pin at 5-12VDC via an integrated regulator.
7.41 €
Pro Mini 5V ATmega328P development board Arduino compatible
PRO MINI 5V development board
In Stoc
Compact board for Arduino projects with Atmega328P at 16MHz, ideal for prototyping and automation where space matters. It is programmed by external programmer via TTL-USB, powered on the RAW pin at 5-12VDC with integrated regulator, offers 14 digital pins, 8 analog and 6 PWM outputs for sensors, controls and actuators.
4.42 €
Arduino UNO R3 compatible development board ATmega328P USB Type-C with pin headers
UNO R3 Development Board, Arduino Compatible, ATmega328p, CH340G, with Pin Header, Type-C
In Stoc
Arduino-compatible development board for rapid prototyping and electronic projects, with ATmega328p and USB Type-C interface via CH340G for easy programming from the Arduino IDE. It offers 5V logic, 14 digital pins with 6 PWM and 6 analog inputs, operates at 16MHz, and includes a male pin header for quick connection to modules and sensors.
6.12 €
UNO R3 Arduino compatible development board, AtMega328p
Out-of-Stock
UNO R3 Arduino compatible development board, AtMega328p, CH340G, MiniUSB
Out-of-Stock
Arduino compatible development board for rapid prototyping and educational projects, based on ATmega328P with MiniUSB interface and CH340G USB controller. Offers automatic USB or DC power supply, 14 digital pins with PWM and 6 analog inputs, works with most Arduino libraries and shields. Includes male pin header.
6.02 €
Uno R3 board with ESP8266 WiFi and CH340 USB
Uno R3 development board with Wifi ESP8266, Arduino compatible
In Stoc
The Arduino compatible development board combines ATmega328p with ESP8266 Wifi module for IoT and automation projects, offers stable USB connection via CH340 for fast programming, includes switches for easy selection of working mode between microcontroller and Wifi, keeps the standard Uno R3 pinout with 14 digital and 6 analog pins, provides 3.3V and 5V outputs.
9.88 €
Compatible development board WeMos D1 Mini, ESP8266, ESP-12F
WeMos D1 Mini, ESP8266, ESP-12F compatible development board
In Stoc
Compact development board with ESP8266 and WiFi, ideal for IoT projects and fast automation. Powered at 5V via MicroUSB, operates at 3.3V logic, has 4MB Flash and CH340G USB interface for easy programming. Offers 9 digital pins, 1 analog input and support for Arduino IDE or LUA code.
4.94 €
ADS1115 16-bit ADC Module I2C for Arduino
ADS1115 Analog to Digital Converter Module, 16bit
In Stoc
Quickly and accurately converts analog signals to digital data for Arduino and other development boards, offering 16-bit resolution and up to 860 samples per second via I2C. Supports 4 single-ended or 2 differential inputs, includes up to 16X programmable amplifier for small signals, and the I2C address is selectable from 4 options for easy integration into projects.
6.60 €
Arduino compatible SD card reader module SPI
SD card mode
In Stoc
Allows reading and writing data to SD card directly from Arduino projects, ideal for logging, storing configurations or files. Communicates quickly via SPI interface, supports SD and SDHC cards, is powered at 5V on VCC with integrated 3.3V regulator for compatibility, has 6 essential pins and 4 M2 mounting holes for secure mounting.
1.03 €
MQ-135 Air Quality Sensor 5V analog digital
Air quality sensor MQ-135
In Stoc
Air quality monitoring module, detects ammonia, gasoline vapor, smoke and other harmful gases, based on SnO2 which changes its conductivity depending on the pollution level. It operates at 5V with low consumption, offers 0-5V analog output for continuous measurement and TTL digital output for settable thresholds, easy to integrate with Arduino and other microcontrollers.
2.96 €
LED digital display 0.56" 3 digits, 7 segments, Red
Digital LED display 0.56" 3 digits, 7 segments, Red
In Stoc
3-character, 7-segment LED display, ideal for clearly indicating values in electronic projects, control panels or instrumentation. It has a common cathode for easy integration, is compatible with development boards such as Arduino, offers large 0.56 inch digits for good visibility, with intense red light, 12-pin connection.
0.72 €
DC motor controller PWM 3-18V 2A adjustable
Adjustable DC 3-18V 2A PWM motor controller
In Stoc
Simple and precise speed regulation for DC motors, through PWM control with good efficiency and low losses. It operates on 3-18V power supply and supports up to 2A, allows smooth speed adjustment with potentiometer, compact design easy to integrate into DIY projects, automation and light industrial applications.
1.33 €
30A brushless motor controller ESC CW CCW
ESC Motor Controller 30A
In Stoc
30A ESC controller for brushless motors, ideal for drones and other RC projects, provides stable speed control in CW or CCW direction. Includes BEC 5V 1.5A to power the electronics, works with 2-3 cell batteries and has cut off protection at 4V. Compact format 57 x 25 x 8 mm and low weight of 27 g for easy integration.
8.53 €
MicroUSB to Type-C converter adapter
MicroUSB to Type-C converter
In Stoc
Quickly adapts cables and accessories with MicroUSB plug to devices with Type-C port, ideal for charging and connecting without replacing cables. It has MicroUSB input and Type-C output, compact construction easy to carry, plug and play connection, discreet finish in white or black depending on the batch.
1.15 €
Modular plastic storage box for components with transparent lid
Modular component storage box with lid
In Stoc
Modular plastic organizer for storing small electronic components, resistors, LEDs, SMDs, with module dimensions of 75x31.5x21.5 mm. It has a transparent lid for quick identification and a spring hinge for self-opening when unlocked. The modules snap together with self-locking on all sides, for customized configurations and space saving.
1.08 €
Waterproof project enclosure 70x45x30mm
Project box 70x45x30, water resistant
In Stoc
Compact box for electronic projects, ideal for assembly and protection in hobby or industrial applications. The water-resistant housing helps keep components safe from moisture and splashes, offers good rigidity and easy access for customization through cutouts. Dimensions 70 x 45 x 30 mm, color gray or black depending on the batch.
2.87 €
3.5 inch LCD TFT Display 320x480 ILI9486 34 pin
Out-of-Stock
Display 3.5" Ultra HD 320x480 ILI9486/ILI9488
Out-of-Stock
3.5 inch TFT color screen for clear graphical interfaces in STM32 projects, with 320x480 resolution and 65K colors display on the 16-bit RGB parallel bus. It operates at 3.3-5V thanks to the integrated regulator, includes SD card support, is compatible with ALIENTEK STM32 Mini, Elite, WarShip, Explorer and Apollo boards, 34-pin connection.
25.17 €
1.8 inch SPI TFT LCD color display ST7735S
Display Color 1.8 inch, TFT LCD
In Stoc
1.8 inch TFT LCD color display for Arduino and other boards, ideal for displaying sensor data and simple graphical interfaces. Offers 128x160 resolution for clear images, vibrant colors and 120° viewing angle, fast communication via SPI interface and ST7735S control, with adjustable backlight via dedicated pin.
8.04 €
3.5 inch HDMI touchscreen display for Raspberry Pi 4
3.5 inch HDMI Display, Touchscreen, for Raspberry Pi 4
Last items in stock
Compact 3.5 inch screen with HDMI connection, ideal for interfacing and monitoring on Raspberry Pi 4, touchscreen support via pin header and installed driver. Also works with PC, consoles or DVR via HDMI, with clear display at 480x320 and software configuration up to 1920x1080 at 60Hz. Includes HDMI adapter for mounting directly over Pi 4.
41.87 €
LED display 0.56 inch 1 digit 7 segment common cathode
LED digital display 0.56" 1 digit 7 segments
In Stoc
0.56 inch 1 digit 7 segment LED display, common cathode, ideal for quickly indicating values in Arduino and other development board projects. It operates at 5VDC and offers good visibility in red, has 10 pins for easy connection and supports current per segment up to 40mA with series resistor.
0.48 €
LED Display 0.56 inch 2 digit 7 segment red
LED digital display 0.56" 2 digits, 7 segments, Red
In Stoc
2-character, 7-segment LED display, ideal for clearly displaying numerical values in electronic projects and control panels. It operates on common cathode, has highly visible red light, 0.56 inch characters for easy reading and 10 pins for quick connection, compatible with development boards such as Arduino.
0.60 €
LED Display 0.56 4 digit 7 segment red
LED digital display 0.56" 4 digits, 7 segments, Red
In Stoc
4-character red LED display, ideal for clearly displaying values in electronic projects, meters and control panels. It has 4 digits with 7 segments for good readability, common cathode, 10 pins for easy connection and is compatible with development boards such as Arduino. The 0.56 inch character size provides good visibility from a distance.
0.67 €
Magnetic Reed Switch N/O 2x14mm glass capsule
Magnetic Reed Switch, N/O
In Stoc
Reed magnetic switch with N/O contact, ideal for position detection and opening monitoring in automation, alarms or industrial equipment. Glass capsule ensures protection and stability, compact dimensions 2 x 14 mm for easy integration, total length 45 mm, fast and reliable switching when a magnet approaches.
0.37 €
Display LCD TFT 2.8", Touchscreen, STM32
LCD TFT Display 2.8, Touchscreen, SD Card, 34P, STM32, 3.3-5V
In Stoc
2.8 inch 240x320 color TFT screen with resistive touchscreen, ideal for graphical interfaces on STM32 ALIENTEK projects. ILI9341 controller, SPI communication with only 4 IO pins, offers 65K colors and white LED lighting. Includes microSD slot on the back for files and images, operates at 3.3V or 5V and has a 34-pin connector.
20.46 €
0.96 OLED Display I2C SSD1306 blue
OLED Display 0.96" I2C IIC Blue
In Stoc
Compact 0.96 inch blue OLED screen, ideal for display in Arduino projects and other development boards, connects quickly via I2C with only two data pins, offers 128x64 resolution and visual angle over 160 degrees, has very low consumption and operates at 3V-5V, without backlighting thanks to self-illuminated pixels, with SSD1306 controller.
3.76 €
1.3 inch white OLED display 128x64 I2C SH1106
OLED Display 1.3" White 128x64
In Stoc
1.3 inch, 128x64 white OLED display, ideal for clearly displaying text and graphics in Arduino projects and other development boards. It connects easily to I2C with only 2 pins, does not require backlighting for low consumption, operates at 3-5V and uses the SH1106 driver for good compatibility with common libraries.
7.88 €
OLED Display 0.91 128x32 I2C SSD1306
Display OLED IIC I2C 0.91" 128x32
In Stoc
Ideal for displaying clear text and symbols in microcontroller projects, this 0.91 inch OLED offers a 128x32 blue image without backlight, with low consumption and very good contrast. It communicates simply via the I2C interface with the SSD1306 driver, operates at 3.3-5VDC and has fast connection via the GND, VCC, SCL, SDA pins.
3.60 €
Tool magnetizer demagnetizer device
Magnetization, demagnetization device
In Stoc
Quickly magnetizes screwdrivers, tweezers and other metal tools to keep screws fixed during assembly. It is simple to use, just pass the piece through the dedicated magnetization slot. It offers partial or complete demagnetization through slots of different sizes. Compact, durable and useful in any workshop, the color may vary depending on the batch.
3.16 €
ULN2003 stepper motor driver 4.5-20V
Stepper motor driver ULN2003
In Stoc
Stepper motor control module, ideal for Arduino projects and simple automation, operates at 4.5-20VDC, accepts High Low 3.3V TTL control signal, provides stable switching for motor coils and has compact dimensions of 32 x 24 x 18 mm for easy integration into assemblies.
0.90 €
PWM Driver 5A 90W 3-35V
PWM Driver 5A, 90W, 3-35V
In Stoc
Compact PWM module for controlling DC motor speed or dimming LED strips, flexible 3-35V power supply with 3-15V or 5-35V selection, output current up to 5A, controlled power up to 90W, fine adjustment of duty cycle 1-100% at 10kHz, low standby power consumption and 30 x 24mm dimensions for easy integration.
1.64 €
A4988 stepper driver with aluminum heatsink
Stepper driver A4988 + Radiator
In Stoc
Stepper motor driver ideal for CNC and 3D printers, offers precise control with microstepping up to 1/16 and 16 segments, operates at 8.2-35V and supports up to 2A adjustable from the potentiometer, mounts directly on the development board without shield. Includes self-adhesive aluminum heatsink for better thermal dissipation and integrated overcurrent and overtemperature protections.
1.69 €
DRV8825 1/32 stepper motor driver for CNC Shield
Out-of-Stock
Stepper Driver DRV8825
Out-of-Stock
Stepper motor driver, compatible with CNC Shield UNO and Nano, ideal for CNC projects and 3D printers where you need fine control and stable torque. Offers microstepping up to 1/32 for smoother movement, supports up to 2.5A adjustable from the potentiometer, operates at 8.2-45V and includes overcurrent, overtemperature and undervoltage protections.
2.41 €
TCST2103 infrared optical endstop with cable, RepRap
Wired optical endstop
In Stoc
Infrared optical travel limiter for 3D printers and CNC, ensures precise detection of travel ends for XY Z axes. Uses TCST2103 sensor for fast and stable switching, has 3 pins for simple connection, includes 800 mm cable with connector, compatible with Arduino and other development boards.
1.68 €
A4 thermal transfer film for PCB, laser
PCB thermal transfer foil, A4
In Stoc
A4 thermal transfer foil for PCB prototypes, ideal for fast transfer of traces onto copper with laser printers. Print on the glossy side, attach to the board and transfer with an iron, then peel off easily for a clear outline. Allows for simple corrections with alcohol or acetone before etching. Minimum quantity 20 pieces.
0.30 €
DC motor controller 10-55V 60A 3000W with display and reversible control
DC 10-55V 60A 3000W motor controller with display
In Stoc
Controls the speed and direction of rotation of DC motors, ideal for industrial applications, robotics or DIY projects. Operates at 10-55VDC, supports up to 60A and 3000W, includes display for quick adjustment and monitoring, offers fine speed control and easy reverse switching.
24.04 €
PLATO 170 wire stripper, cuts copper up to 1mm
Wire Pliers
In Stoc
Pliers for precise cutting of copper wires up to 1 mm diameter, ideal for electronics and fine wiring work. Provides clean cuts with reduced effort, thin tip for access in tight areas, robust construction for repeated use, ergonomic handles for control and comfort.
2.28 €
Milling cutter for PCB and engravings 0.1mm
Out-of-Stock
PCB and engraving cutter 0.1mm
Out-of-Stock
Tungsten carbide cutter for precise circuit tracing on PCBs and fine engraving in wood or metal, ultra-thin 0.1mm tip for clear details, 10 degree angle for controlled cutting, standard 3.175mm shank compatible with most CNC and mini routers, 33mm length for stability while working.
3.09 €
Breadboard 400 holes for solderless prototyping
Out-of-Stock
Breadboard 400 points
Out-of-Stock
Allows rapid prototyping without soldering, ideal for modules, sensors, LEDs and other components. Offers 400 connection points, clear routing organization, stable contact for repeated testing, compatibility with jumper wires and standard pins, easy to integrate into Arduino projects and electronic development.
1.31 €
PAM8610 stereo amplifier 2x10W class D
PAM8610 dual channel 10W stereo amplifier
In Stoc
Class D digital stereo amplifier module, ideal for compact audio projects, delivers 2x10W with low distortion and low EMI for clean sound. Operates at 7-15VDC, recommended 12V, offers up to 32dB gain and good SNR, includes pins for power, stereo input, mute and dedicated speaker outputs. Dimensions 30x25mm.
2.29 €