Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Logic level converter module, 5V IN, 12V OUT, Common Cathode, PNP
It quickly converts 5V logic signals into 12V commands for relays, solenoid valves or industrial inputs, being compatible with Arduino and other development boards. It has 4 channels, optoisolation for electrical separation, PNP common cathode connection and screw terminals for secure wiring, switches up to 10 kHz and requires 12V power supply on VCC and GND.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
Logic level converter module, from 5VDC to 12VDC, with optoisolator, compatible with Arduino and other development boards, with common cathode, PNP.
It has 4 channels and is used when you want to convert a logical signal from 5V to 12VDC.
Power supply required for the output voltage, in the case of this module, of 12VDC connected to the VCC and GND pins (they are easily recognized because they have the Blue connector.
For each separate input, the Plus and Minus of the 5V signal will be connected, and on the output there will be only the output pin of the signal modified to 12V.
A High Level signal of 5V on the input corresponds to a signal of 12V on the output. A Low Level signal of 0V on the input corresponds to a signal of 0V on the output.
Specifications:
Supply voltage: 12VDC
Input logic voltage: 5VDC
Output logic voltage: 12VDC
Input signal connection: Common Cathode, PNP
Switching limit frequency: 10KHz
Coupling mode: Optical isolation
Connection method: Screw terminal
Connection mode:
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
