Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
LilyPad 328p development board
The ideal board for wearables projects, it is easy to sew into clothes thanks to the large holes for the conductive wire. It uses the ATmega328p as on the Uno R3, runs at 8MHz and supports 3-5V power supply. It offers 14 digital, 6 analog and 6 PWM pins for sensors and actuators, includes a Reset button and has a slim 50mm round format.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
Lily Pad development board, ATmega 328p, 5V.
Specially designed for projects that can be worn, integrated into clothes. The holes arranged on the board's circumference are large in order to facilitate the connection of the conductive thread ("conductive thread").
It uses the same Atmel Mega328p chip as the one on the Uno R3 development boards.
Supply voltage: 3 - 5VDC
Digital pins: 14
Analog pins: 6
PWM pins: 6
Maximum current per pin: 40mA (recommended 20mA)
Memory: 16KB, part of which is occupied by the bootloader
EEPROM memory: 512 bits
Processor frequency: 8MHz
SRAM memory: 1KB
Reset button
Dimensions mm: 50mm (diameter) x 2mm (PCB)
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
