Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Joystick navigation mode, 5 directions, 5D
5D navigation module with joystick and two dedicated SET and RESET buttons, ideal for menus, games and interactive projects with Arduino and other boards. Provides Up, Down, Left, Right and Click control by pressing, operates at 3.3-5V and has fully programmable buttons, simple connection via COM to GND.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
The Joystick module for navigation and buttons, compatible with Arduino and other development boards, is a 5D joystick designed for microcontrollers.
This module ensures control in five directions, being ideal for games and interactive projects.
The joystick allows navigation in the menus through the directions Up, Down, Left, Right and Click by pressing (confirmation key). On the board there are also two physical buttons, differently colored, for SET and RESET.
All buttons can be programmed according to the function assigned in the microcontroller.
The operation of the board is relatively simple. All buttons, when pressed, will be shorted to the COM pin.
Specifications:
Compatibility: Arduino and other MCUs
Supply voltage: 3.3 - 5VDC, uses the logic voltage of the board
Control: Joystick 5D
Buttons: Independent, programmable
Applications: Games, control projects
Dimensions mm: 40 x 25mm
Instructions:
Connect the module to the Arduino board using the appropriate cables and connections to the pins designated in your code.
Connect the COM pin of the module to the GND of the development board.
Program the functions of each button through the Arduino software.
Use the module to navigate and control projects or games.
Definition of pins:
COM: GND
UP: Up
DWN: Down
LFT: Left
RHT: Right
MID: Middle, Joystick press
SET: Pin Set
RST: Pin Reset
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
