Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Flux syringe gun, K-2208, 18mm tube, with tip, RL-062A
Practical tool for precise application of flux or solder paste, compatible with tubes with an internal diameter of 18mm, offers good control over dosing in electronics and service work, includes two metal tips of 0.8mm and 1.2mm for fine application, has a dedicated place for storing the tips in the gun body, compact format 135 x 50mm for easy handling.
Shipping by Thursday 22 October
Buying this product earns you Ft181.47 in loyalty points.
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
The RELIFE RL-062A manual dispenser gun is a dispensing tool for flux syringes, solder paste, or other viscous materials used in electronics service. It pushes the syringe plunger by operating the lever, so the material is applied in a controlled way onto the board, pads, or components. It is suitable for phone and circuit board repairs, SMD soldering, BGA reballing, and laboratory work, where a small and uniform amount of material matters.
The K-2208 / RL-062A model is designed for tubes with an inner diameter of 18 mm. The pushing action is performed by a rod controlled by the lever, which provides uniform force and reduces hand effort compared with pressing directly on the syringe plunger. The set includes two metal dispensing tips, 0.8 mm and 1.2 mm, so you can choose the thickness of the material bead.
Among the main features are the plastic body, ergonomic operating lever, push rod with locking ratchet, and slots in the body where the spare tips are stored. The gun is manually operated and does not require electrical power or batteries.
It is suitable for flux syringes or solder paste syringes that fit the indicated tube size, and the included tips can be used on these syringes for fine or larger doses.
Specifications:
Model: RL-062A
Manufacturer: RELIFE
Type: Manual syringe gun, with push rod
Compatible tube: 18 mm inner diameter
Included tips: 0.8 mm and 1.2 mm
Material: Plastic
Weight: 62 g
Dimensions: 135 x 50 mm
Use:
Prepare the flux or solder paste syringe and remove the protective cap from its end.
Attach the appropriate dispensing tip to the syringe, 0.8 mm for small amounts and precise applications, or 1.2 mm for larger amounts.
Lift the locking ratchet and pull the gun rod back far enough to make room for the syringe.
Place the syringe in the gun, with the plunger end aligned with the slot in the body, then push the rod until it touches the syringe plunger.
Choose a comfortable working position and slowly press the lever to dispense the material, and for a small amount press briefly and stop.
Do not force the lever if the material does not come out; check whether the tip is clogged and clean or replace it.
After use, put the cap back on the syringe and store the spare tip in the slot in the gun so it does not get lost.
For stable results, use slow and even presses, and for denser fluxes or pastes choose the 1.2 mm tip.
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
