Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Electromagnetic Holding Module, 10N, 5V
Compact solution for fastening and securing through a magnetic field, ideal for robotic prototypes and small automations. It operates directly at 3.2-5.3 V, compatible with Arduino and Raspberry Pi, offers an attraction force of up to 10 N, is easily controlled via a digital signal, and has a low consumption of approximately 200 mA for easy power supply from USB or batteries.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
The "holding" type electromagnetic module is a compact and efficient solution for applications requiring mechanical actuation through a magnetic field.
Powered by a voltage of 3.2 - 5.3 VDC, it is directly compatible with platforms such as Arduino or Raspberry Pi, without the need for additional power circuits.
With an attraction force of up to 10 N (approximately 1 kg force), the module is capable of reliably lifting, holding, or manipulating ferromagnetic metal objects (iron, steel).
Control is achieved through a single digital signal, and the low consumption of 200 mA makes it suitable for projects powered by USB sources or batteries.
The compact dimensions of 44 x 24 x 21 mm and weight of only 27 g facilitate its integration into mechanical structures, robotic arms, or automated sorting systems. The module is intended for educational applications, robotic prototypes, and small-scale automation projects.
Specifications:
Operating voltage: 3.2 - 5.3 VDC
Consumption: 200 mA
Attraction force: 10 N (1 kg)
Dimensions: 44 x 24 x 21 mm
Weight: 27 g
Pinout:
| Pin No. | Pin Name | Description |
|---|---|---|
| 1 | GND | Ground |
| 2 | VCC | 3.2 - 5.3 VDC |
| 3 | SIG | Digital control signal |
Usage:
Connect the GND pin to the ground of the development board.
Connect the VCC pin to the 3.3 V or 5 V source of the board.
Connect the SIG pin to a digital output pin of the development board.
Set the SIG pin to HIGH to activate the electromagnet and attract nearby ferromagnetic objects.
Set the SIG pin to LOW to deactivate the magnetic field and release the held object.
Ensure that the power supply can provide at least 200 mA for the correct operation of the module.
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
// Electromagnet holding module - Arduino test example
// Activates the magnet for 3 seconds, then deactivates for 2 seconds
#define MAGNET_PIN 3
void setup() {
pinMode(MAGNET_PIN, OUTPUT);
digitalWrite(MAGNET_PIN, LOW);
}
void loop() {
digitalWrite(MAGNET_PIN, HIGH); // Activate magnet
delay(3000);
digitalWrite(MAGNET_PIN, LOW); // Deactivate magnet
delay(2000);
}
