Drone propeller set 55mm, 1mm shaft, ABS
Drone propeller set 55mm, 1mm shaft, ABS
In Stoc
Providing quick replacement of propellers for drones and microprojects, the set includes a left-handed and right-handed propeller for balance and stability. Compatible with 1mm shaft motors, it has a diameter of 55mm and is made of durable, lightweight ABS suitable for efficient flight.
0.99 €
Robot swivel wheel
Robot swivel wheel
In Stoc
The swivel wheel for the robot, ideal as a front support for 2WD platforms, effectively replaces the ball caster and ensures fluid maneuverability with 360 degree rotation. It has a 24 mm wheel for stable rolling, compact base 38 x 32 mm with 4 mm hole mounting, total height 33 mm, supports up to 10 kg.
1.20 €
Mini coreless motor, 20x7, 1mm shaft, 50000RPM, 3.7V
Mini coreless motor, 20x7, 1mm shaft, 50000RPM, 3.7V
In Stoc
Micro coreless motor for drone propellers and small model airplanes, offers very high speed of approximately 50000 RPM at 3.2-4.2VDC power supply, ideal for 3.7V. It has a compact 20x7mm format, 1mm shaft for easy coupling and a low weight of 15g, with white and black wires for quick connection.
2.19 €
35mm x 7mm wheel, N20 motor
35mm x 7mm wheel, N20 motor
In Stoc
Compact rubber wheel for N20 motors, ideal for small robots and DIY projects where you need stable traction. It has a diameter of 35 mm and a thickness of 7 mm, a profile with good grip on smooth surfaces, a low weight of 3.2 g for efficiency and maneuverability, quick assembly on the motor shaft.
0.60 €
ESC Distribution Board
ESC Distribution Board
In Stoc
The ESC distribution board simplifies power and wiring, allowing multiple ESC controllers to be connected to a single source. It provides 8 power outputs, includes a battery connector in the package, helps organize the installation and reduces wire length, ideal for RC assemblies and electronic applications where stability and order of connections matter.
2.45 €
Mini coreless motor, 20x8.5, 1mm shaft, 50000RPM, 3.7V, AN
Mini coreless motor, 20x8.5, 1mm shaft, 50000RPM, 3.7V, AN
In Stoc
Micro coreless motor for drones and small model airplanes, ideal with propellers for fast and easy propulsion. It operates on a 3.7V Li-Ion battery in the 3.2-4.2V range, reaches approx. 50000 RPM, has compact dimensions 20x8.5mm with 1mm shaft, light weight of 15g and White and Black cables for easy connection.
2.50 €
Motor Drona 2212 920kv, CW thread
Motor Drona 2212 920kv, CW thread
In Stoc
Type 2212 brushless motor for drones and multicopters, offers stable traction and fast response, has 920KV for a good balance between power and efficiency, operates at DC 7-12V, CW thread with clockwise screwing for secure mounting, compact dimensions 22 x 12 mm and weight of only 60 g.
12.77 €
Drona 2212 920kv motor, CCW thread
Drona 2212 920kv motor, CCW thread
In Stoc
Brushless motor type 2212 for drones and multicopters, ideal for efficient and stable propulsion. It has 920KV for good throttle response, operates at DC 7-12V, compact dimensions 22 x 12 mm and a low weight of 60 g. The CCW thread with counterclockwise screwing is suitable for mounting on dedicated propellers, the motor being designed to rotate in the opposite direction.
12.98 €
Gear Motor Kit, TT, Plastic Wheel with Rubber, 3-6V
Gear Motor Kit, TT, Plastic Wheel with Rubber, 3-6V
In Stoc
Ideal for robotics and DIY vehicle projects, it includes a 130 DC motor with a 1.48 gear ratio for good torque at 3-6V and a 65x27 mm plastic wheel with a rubber strip for grip. The TT coupling ensures quick assembly and compatibility with other wheels with the same connector. It offers up to 125 rpm at 3V and 208 rpm at 5V.
1.88 €
Drone propeller set 6045, CW, CCW, with adapters
Drone propeller set 6045, CW, CCW, with adapters
In Stoc
6045 propeller set for drone, with CW and CCW rotation, ideal for quick replacement and stable flight. Includes shaft adapters, compatible with 3, 4, 5 and 6 mm diameters, fits on the QAV250 frame, green, black or orange color depending on the batch, shaft diameter 6 mm.
1.98 €
Power FPV filter, video, LC, 2A
Power FPV filter, video, LC, 2A
In Stoc
LC filter for FPV power and video, effectively reduces noise and lines in the image caused by ripple on DC voltage. Operates up to 16VDC and 2A, uses high value inductors and capacitors for stable filtering. Black housing, compact 35 x 11 x 10mm and 14g, ideal for RC airplane, multicopter and quadcopter.
5.79 €
Mini coreless motor, 16x7, 1mm shaft, 50000RPM, 3.7V
Mini coreless motor, 16x7, 1mm shaft, 50000RPM, 3.7V
Last items in stock
Coreless micro motor ideal for propellers on drones and compact model airplanes, runs at 3.2-4.2V DC and offers up to 50,000 RPM for fast response. 16x7 mm format with 1 mm shaft for easy assembly, 15 g weight for better autonomy, red and blue cables for quick connection.
2.05 €
Holybro radio telemetry set, 433mhz, 100mW
Holybro radio telemetry set, 433mhz, 100mW
In Stoc
433MHz, 100mW radio telemetry set, for stable bidirectional communication between the drone and the ground station, plug and play compatible with Pixhawk Standard and other controllers. Runs SiK open source firmware optimized for MAVLink, easily integrates with Mission Planner, Ardupilot, QGroundControl and PX4, offers full duplex link with FHSS and error correction, with a range of over 300 m out of the box.
134.49 €
Balance charger, LiPo, 2-4S, Type-C power supply, 60W
Balance charger, LiPo, 2-4S, Type-C power supply, 60W
In Stoc
Ultra-portable charger with balance for 2-4S LiPo batteries, ideal for FPV drones and radio model making, USB Type-C power supply from PD or QC 5-20V sources, power up to 60W with selectable charging current 1-6A, XT60 plug and XH balance port, includes abnormal voltage protection and cell error detection, supports firmware update via PC.
49.43 €
Anti-vibration plate for flight controller, Plastic
Anti-vibration plate for flight controller, Plastic
In Stoc
Reduces shock and vibration transmitted to the flight controller, improving drone stability and gyro accuracy. Compatible with APM, Pixhawk, KK and MWC, it uses flexible rubber feet and self-adhesive pads for effective damping. The lightweight plastic construction does not significantly load the drone, and the kit includes plates, screws and mounting elements for quick installation.
4.54 €
Power distribution module for APM, with BEC 5.3V, XT60, 30V, 90A
Power module for APM, with BEC 5.3V, XT60, 30V, 90A
In Stoc
Provides stable and clean power for APM and Pixhawk directly from LiPo, while providing real-time voltage and current measurement via 6-pin Molex cable connected to PM port. Includes 5.3V up to 3A BEC for controller and accessories, XT60 connector, support up to 30V and 90A current sensor, compact and lightweight for quick installation.
8.57 €
ESC BLHeli, 30A, with UBEC, for radio models and drones, 2-4S
ESC BLHeli, 30A, with UBEC, for radio models and drones, 2-4S, 16.8V
In Stoc
Electronic speed controller for brushless motors, ideal for quadcopters, fixed wings and FPV drones, offers 30A continuous and up to 40A peak for safe accelerations. BLHeli firmware ensures fast response and smooth control, and UBEC 5V 3A stably supplies the model's electronics. Compatible with 2-4S LiPo, programmable via FC or card.
18.23 €
5030 ABS propeller set with adapters
Propeller set 5030, ABS, 5mm shaft, with adapters
In Stoc
5030 propeller set for QAV250 drone, made of durable ABS for stable flight and fast response. Includes one CW and one CCW propeller, 5mm round shaft and adapters for reduction to 3.8mm or 3mm, total length 127mm. Available in green, black or orange depending on the batch.
1.45 €
Drone propeller balancing tool, magnetic suspension, carbon
Drone propeller balancing tool, magnetic suspension, carbon fiber
In Stoc
Quickly balances drone propellers by magnetic suspension with N45 magnets, the shaft rotates freely without friction to immediately identify the heavier part. The carbon fiber base provides rigidity and durability, the metal cones automatically center the propeller on holes of different sizes. Compatible with propellers, turbines or wheels up to 80g, compact and easy to use.
7.97 €
Silicone cable set, 20AWG, 30m, 5 colors
Silicone cable set, 20AWG, 30m, 5 colors
In Stoc
20AWG silicone cables, 30 m total in 5 colors, ideal for aeromodelling, drones and RC models, for motor-ESC connections and power supply. Multi-stranded tinned copper conductor for good conductivity and reduced oxidation, flexible silicone insulation resistant up to 200C, 6 m on each roll, practical box for easy storage and unwinding.
23.53 €
Balance charger, ToolkitRC, M4, pocket, Type-C power supply
Balance charger, ToolkitRC, M4, pocket, Type-C power supply, 2-4S, 80W
Last items in stock
Compact charger with balance and IPS color screen, ideal for 1S-4S Lithium batteries at power up to 80W. It is powered directly via USB Type-C with PD or QC protocols or via XT60, has XT60 and XT30 outputs with slide selection for safe connection, includes Storage mode and active cooling for stable use.
61.09 €
XT60 power plug at 5.5x2.1mm, compatible with DJI glasses
XT60 to 5.5x2.1mm power plug, compatible with DJI goggles, 121cm length
In Stoc
Power cable that allows you to connect a battery with an XT60 plug to devices with a 5.5x2.1mm input, including DJI FPV V2 goggles, for stable and fast power in the field. It has a robust XT60 connector, a compatible 5.5x2.1mm cylindrical plug, and a length of 121 cm for mounting flexibility, ideal for FPV setups and mobile applications. Compatible with DJI goggles with 2S batteries.
7.92 €
55mm propeller set, CW and CCW, for 8520 and 720, 1mm shaft
55mm propeller set, CW and CCW, for 8520 and 720, 1mm shaft
In Stoc
CW and CCW propeller set for 8520 and 720 mini coreless motors, ideal for assembly or replacement on micro drones and RC projects. Provides efficient propulsion with a diameter of 55mm, 1mm shaft mounting with a hole under 1mm for tight fit, made of durable ABS, black finish. Includes 1 CW propeller and 1 CCW propeller.
1.00 €
XT30 connector pair, Mother-Father
XT30 connector pair, Mother-Father
In Stoc
Set of XT30 female and male connectors, ideal for quickly making secure electrical connections in RC applications, batteries and electronic projects. Provides firm connection and vibration resistance, supports up to 500V and 15A, is compact and easy to integrate, delivered as a complete pair for immediate assembly.
1.06 €
2-axis camera support servo motor mount, PT, anti-vibration
2-axis camera support servo motor mount, PT, anti-vibration, PTZ, for SG90, MG90S
In Stoc
Lightweight platform for FPV cameras, allows Pan Tilt movement on two axes for fast and stable orientation, has horizontal freedom of up to 260 degrees, plastic construction weighing only 20 g, includes guide for organizing servo cables, compatible with SG90 and MG90S servos, comes with screws, without servos or camera.
1.67 €
Drone propeller set 1045, square hole, CW+CCW, 254mm
Drone propeller set 1045, square hole, CW+CCW, 254mm
In Stoc
Set of two CW and CCW type 1045 propellers, suitable for drones and compatible with 2212 920kv motors, offers stable and efficient propulsion for more controlled flight. Made of durable plastic, they are 245mm long and have a square hole mount for quick assembly and secure fixation.
2.06 €
TATTU R-LINE LiPo battery, 6S1P, 6S, 1300mAh, 120C, Version
Out-of-Stock
TATTU R-LINE LiPo battery, 6S1P, 6S, 1300mAh, 120C, Version 3.0, 22.2V, XT60
Out-of-Stock
LiPo battery for FPV drones, optimal for strong acceleration and stable current delivery in flight. Offers 22.2V in 6S1P configuration, 1300mAh for low weight, 120C discharge rate with burst up to 240C for fast response, XT60 connector and JST-HX balance port for correct charging.
50.29 €
TATTU R-LINE LiPo battery, 4S1P, 4S, 1800mAh, 120C, Version
TATTU R-LINE LiPo battery, 4S1P, 4S, 1800mAh, 120C, Version 3.0, 14.8V, XT60
In Stoc
LiPo battery for FPV drones, optimized for fast power delivery and consistent flight response. Offers 14.8V in 4S configuration and 1800mAh for balanced autonomy, 120C discharge rate with 240C burst for powerful accelerations, XT60 connector and JST-HX balance port for secure connection and correct charging.
54.32 €
TATTU R-LINE LiPo battery, 6S1P, 6S, 1550mAh, 120C, Version
Out-of-Stock
TATTU R-LINE LiPo battery, 6S1P, 6S, 1550mAh, 120C, Version 3.0, 22.2V, XT60
Out-of-Stock
LiPo battery for FPV drones, designed for power and fast response to acceleration, 6S 22.2V 1550mAh with 120C discharge rate for constant current delivery. Version 3.0 offers high performance in demanding flights, includes XT60 connector and JST-HX balance plug for correct charging, compact format and weight of 256 g.
60.38 €
TATTU R-LINE LiPo battery, 4S1P, 4S, 1550mAh, 120C, Version
TATTU R-LINE LiPo battery, 4S1P, 4S, 1550mAh, 120C, Version 3.0, 14.8V, XT60
In Stoc
LiPo battery for FPV drones, designed for fast current delivery and firm throttle response, 4S 14.8V 1550mAh, 120C discharge rate for constant power in flight, XT60 connector and JST-HX balance plug for correct charging, version 3.0 for stable performance in competitive setups.
46.23 €