Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Diode Module Sense, Anti-Reverse, 75V, 12A
It ensures one-way current flow between the MPPT controller and the battery, preventing reverse charging and backflow current in solar systems. It operates at 9-75V, supports 12A continuous and 20A peak, has a very low internal resistance of 4 mOhm for low losses and heating, minimal stand-by consumption and a compact format for easy integration.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
The 75V, 12A diode module, ideal for solar panel and battery systems, which prevents reverse charging and reverse current. This module has an internal starting resistance of only 4 milliohms and an operating temperature between -20 and 100 degrees Celsius. It is able to withstand a peak current of up to 20A and a continuous working current of up to 12A, which makes it suitable for a wide range of applications, especially solar systems coupled with battery charging.
This module is indicated to be positioned between the charge controller (MPPT) and the battery, ensuring the direction of current flow only in one direction, from the MPPT to the Battery, blocking the flow in the opposite direction, from the Battery to the MPPT.
The dimensions and low power consumption in stand-by make this module a simple and efficient solution for replacing ordinary diodes, reducing heat and increasing efficiency.
The module can be used as isolation between the power source and the inductive load.
The module does not have a protection function for reverse polarity connection. Do not reverse the positive and negative poles.
In conditions of high ambient temperature and poor ventilation, it is recommended to reduce the output current.
Specifications:
Input voltage: 9-75V
Type: Anti-reverse, anti-backflow, anti-reverse irrigation diode
Internal starting resistance: 4 mOhm
Operating temperature: -20 to 100 degrees Celsius
Peak current: 20A
Polarity protection: NO
Standby current: 0.7mA at 24V
Continuous working current: below 12A
Voltage drop: 0.03V at 2A, 0.05V at 5A, 0.06V at 8A, 0.07V at 10A, 0.09V at 12A
Dimensions: 23 x 14 x 2.6mm
Use:
The module is simple, being provided with a sense diode on the Positive (+) pole. VIN+, OUT+ and two GNDs are marked on the PCB. This module is inserted between the source that charges the battery and the battery.
VIN+: Connects to the plus output from the solar panel, MPPT module or the source responsible for charging the battery.
GND: The GND next to the input is connected to the minus of the output from the solar panel, the MPPT module or the source responsible for charging the battery.
OUT+: Connects to the Plus (+) terminal of the battery.
GND: The GND next to the output is connected to the Minus (-) terminal of the battery.
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
