Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
CNC controller, Mach3, 5-axis interface, parallel
CNC interface for Mach3 via parallel port, controls up to 5 axes with stepper motors, USB power supply with separation for PC protection, optical isolation for stable signals, 0-10V and PWM analog output for spindle speed regulation, inputs for E-stop and limits, operates at 12-24V for easy integration into CNC systems.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
CNC controller for operating CNC machines through the parallel port, compatible with MACH3 software and other similar applications, which supports up to 5 stepper motors for a total of maximum 5 movement axes. USB power and peripheral phase separation ensure computer protection, while features such as optical isolation and support for analog signals offer versatility in use.
It is ideal for controlling 5-axis stepper motors and managing spindle speed.
Provides full support for MACH3 software and other parallel port software.
It has inputs for emergency signals, limit and stop functions, outputs for controlling the speed of the main shaft and the switch.
It accepts input voltages between 12-24V and includes an anti-reverse function.
0-10V analog output for adjusting the shaft speed, compatible with analog converters.
All 17 open ports allow control of 5-axis stepper motors.
Specifications:
Input voltage: 12-24VDC
Cable length: Approximately 50 cm
Output ports: P17 for spindle switch, P1 for PWM signal and spindle speed control
Number of axles: 5
Compatible: Stepper
Size: 90 x 70 x 15mm
Pinouts:
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
