Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
BMS module 6S, Li-Ion, 15A, 25.2V
Designed for 6S Li-Ion packs up to 25.2V, this BMS ensures safe battery management and extends battery life. It offers overcharge, overdischarge and short circuit protection, supports 15A nominal current with a peak of up to 25A, is compatible with 4.2V cells when charging and has low idle power consumption.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
BMS module designed to be used with 6 lithium-ion batteries in series, providing protection against overcharge, overdischarge and short circuits, thus extending battery life and protecting against damage.
The board has the capacity to manage up to 6 lithium-ion battery cells with a nominal voltage of 24V and a nominal current of 15A.
It is compatible with any lithium-ion battery that has a charging voltage of 4.2V per cell.
Characteristics:
Protection against overcharging: the PCB board will stop charging when the voltage exceeds the value of 4.28V per cell (do not charge above 4.2V per cell). This voltage is a safety voltage to prevent major damage, which is the purpose of the BMS. strictly follow the recommendations for use specific to each cell.
Protection against excessive discharge: the PCB board will stop the discharge when the battery voltage drops below the value of 2.55V per cell (do not discharge below 3V per cell). This voltage is a safety one to prevent major damage, this is the purpose of the BMS . strictly follow the recommendations for use specific to each cell.
Protection against short circuits: the PCB board will stop the discharge when the current exceeds the maximum value of 30A.
Login:
Specifications:
Number of cells supported: 6 Li-ion battery cells (3.7V nominal each)
Nominal voltage: 24V
Nominal current: 15A
Maximum charging current: 15A (recommended charging with 0.5C)
Maximum peak discharge current: 25A
Maximum charging voltage: 25.2V
Minimum discharge voltage: 16.8V
Overload detection voltage: 4.28 ± 0.05V
Overload protection delay time: 0.1S
Overload protection release voltage: 4.08 ± 0.05V
Overdischarge detection voltage: 2.55 ± 0.08V
Over-discharge detection delay time: 0.1S
Overdischarge release voltage: 2.9 ± 0.1V
Overcurrent detection voltage: 150mV
Overcurrent detection delay time: 9MS
Protection current against overcurrent: 30 ± 3A
The condition for releasing the overcurrent protection: disconnect the load
Short circuit detection delay time: 250uS
The condition for releasing the short-circuit protection: disconnect the negative
Conduction resistance of the main circuit: ≤20mΩ
Working current: ≤30uA
Quiescent current (battery overdischarge): ≤10uA
Temperature range: -30 / + 80 °C
Dimensions mm: 50 x 30 x 2mm
- Technology
- Lithium Ion
- Load voltage
- 25.2VDC
- sway
- Not
- Nominal Current
- Number of cells
- 6S
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
