Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Autolevel sensor for 3D printers, 3D Touch
Allows you to add autoleveling to your 3D printer, measures the bed at multiple points on the Z axis for a constant distance between the nozzle and the surface and automatically corrects during printing. Operates at 5V, springless mechanical drive, includes 1 m cables and simple connection on 3 control pins and 2 Zmin pins.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
Sensor that allows adding the autolevel functionality to 3D printers. This accessory makes it possible to detect the position of the bed on the Z axis in several points so that the distance between the print head and the printer bed is always the same, partially eliminating the need to manually bring the bed to level with the print head.
since the printer will always correct the position of the Z axis during printing according to the distance detected by the sensor, it is still recommended that the bed be leveled manually from time to time, so that the movements of the axis are minimal.
This model is the one without spring .
Specifications:
Supply voltage: 5VDC
Current: 15mA
Maximum peak current: 300mA
Cable length: 1 meter (a short and a long cable are included in the package
Action: mechanical
Login:
3 pins: Green->GND, Red->5VDC, Yellow->control signal
2 pins: Black->GND, White->Ground
Content:
1 x Sensor
1 x PCB board with wires
1 x Set of screws
1 x Pins
Instructions:
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
Reviews (2) - Review moderation
Este exact ce vroiam, merge perfect.
Niate varfuri de rezerva erau bine venisi aaaaaaaaaaaa
