Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Addressable LED strip quick connector, 10mm, L shape, 3P
L-shaped quick connector for joining two 10mm addressable LED strips at 90 degrees, without soldering, compatible with WS2811, WS2812B, WS2813 and SK6812. It has 3 pins for stable connection, works at 5V, 12V and 24V, includes right angle PCB for clean corners and durable PVC housing, ideal for routes with direction changes.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
L-shaped quick connector specially designed for joining two WS2811, WS2812B, WS2813 and SK6812 LED strips with a width of 10mm, compatible with 5V, 12V and 24V supply voltages.
This connector allows for a 90° corner joint without the need for soldering, making it ideal for LED installations that require changes in direction. It is made of weatherproof PVC plastic, 90-degree PCB between connectors, and has 3 pins.
The connector is suitable for addressable RGB strips, and for silicone-coated strips it is necessary to remove the protective layer in the connection area to ensure correct contact.
Specifications:
Connector type: L-shape (90°)
Available pins: 3PIN
Compatibility: WS2811, WS2812B, WS2813, SK6812 5050 SMD RGB
Supported voltage: 5V, 12V, 24V
LED strip width: 10mm
Outer material: PVC plastic
Use:
Open the connector cover and insert the LED strip into the slot.
Correctly align the contacts (+ and -) of the strip with those of the connector.
Close the lid until it is securely fastened.
For waterproof LED strips, remove the silicone layer from the contact area before connecting.
Pull the tape gently to check for proper fixation.
Attention: when used with addressable strips, respect the current direction indicated on the PCB (arrows).
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
