Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Ultrasonic cleaning device
Ultrasonic bath cleaning device for rapid removal of flux and impurities from PCBs, but also for jewelry or fine parts, uses cavitation at 40 kHz for deep cleaning, has a 0.5 l tank and compact bowl, selectable power 30 W or 50 W for adaptation to materials, automatic cycle of approximately 99 seconds for simple use.
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
Ultrasonic cleaning device ideal for cleaning electronic circuits, jewelry and other products that require deep cleaning.
This device uses the oscillating signal to produce the cavitation effect through which vapor bubbles are formed inside a liquid. These bubbles will remove all types of dirt from the components.
It can be successfully used to clean pcb boards after the tinning process and can even clean traces produced by the action of water on electronics.
Use:
Add the required amount of liquid (demineralized water plus detergent if necessary), usually about 2/3 of the tank's capacity. Make sure that the socket used is grounded. Turn on the device. Select the desired power between 30W and 50W. The device will turn itself off after 100 seconds.
Important! Do not leave liquid in the bowl after use to protect the bottom of the container from corrosive actions and do not start the device without liquid in the bowl. It is not recommended to use consecutively more than 2 times without a break for cooling.
Specifications:
Supply voltage: 220VAC
Power: 50W / 30W, selectable from the button
Frequency: 40KHz
Volume: 0.5L
Cleaning program: 99 seconds
Norm of use: Hobby, a break between washes is recommended for optimal cooling of the device.
Dimensions mm bathtub: 165 x 85 x 40mm
External mm dimensions: 175 x 95 x 50mm
Weight: 0.65 Kg
The cover can be made of plastic or metal depending on the batch
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
