Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
TTGO T-Display development board, ESP32, WiFI, Bluetooth, Display 1.14", USB Type-C
Compact development board for IoT prototyping and graphical interfaces, with ESP32 dual core 240MHz, integrated WiFi and Bluetooth, 1.14 inch color IPS display for fast data display, USB Type-C with CP2104 for easy programming, support for charging and powering from a 4.2V Li-Ion battery via JST connector, includes Reset button and two buttons on GPIO.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
TTGO ESP32 development board with 1.14 inch IPS color LCD Display, 32-bit Xtensa dual core LX6 processor, WiFi, Bluetooth and charging circuit for 4.2V Lithium battery for which it has a connector.
It uses the CP2104 USB to TTL converter to communicate with the computer and requires a USB Type-C cable.
Supports standard firmware upgrade via UART or OTA via network. There is also a Reset button on the board.
The board can work with a battery connected to the JST plug, which will be charged when the 5V power supply is connected via the USB cable.
There are two programmable buttons on the board connected to GPIO0 and GPIO35.
Specifications:
Supply voltage: 5VDC, via USB
Operating current: 60mA approximately
Sleep current: 120uA approximately
Supported battery: Lithium 4.2VDC
Battery working voltage: 2.7 - 4.2VDC
Battery charging current: 500mA
Battery connector: JST 2 pins, 1.25mm
USB: Type-C
Dimensions mm: 51.5 x 25.1 x 8.5
Chipset: Microprocessor ESPRESSIF-ESP32 240MHz Xtensa single-/dual-core 32-bit LX6
FLASH memory: 4MB QSPI
SRAM: 520KB
USB to TTL IC: CP2104
Modular interface: UART, SPI, SDIO, I2C, LED PWM, TV PWM, I2S, IRGPIO, ADC, capacitive touch sensor, DACLNA pre-amplifier
WiFi Standard: FCC/CE-RED/IC/TELEC/KCC/SRRC/NCC
Protocol: 802.11 b/g/n (802.11n, speed up to 150Mbps) A-MPDU and A-MSDU polymerization, support 0.4uS protection interval
Frequency: 2.4GHz-2.5GHz(2400M-2483.5M)
Transmission power: 22dBm
Maximum communication distance: 300m
WiFi mode: Station/SoftAP/SoftAP+Station/P2P
WiFi Security: WPA/WPA2/WPA2-Enterprise/WPS
Encryption: AES/RSA/ECC/SHA
Software development: Cloud server and SDK development support
Network protocol: IPv4, Pv6, SSL, TCP/UDP/HTTP/FTP/MQTT
User configuration: AT instructions, cloud server, Android/IOS application
Operating system: FreeRTOS
Bluetooth: v4.2BR/EDR and BLE
Radio frequency: with -97dBm sensitivity NZIF Class 1, Class 2 receiver and Class-3 AFH transmitter
Audio frequency: CVSD&SBC
Display: TFT LCD IPS
Diagonal: 1.14 inches
Display driver: ST7789V
Pinouts:
Use:
To program the board, it is necessary to download the library https://github.com/espressif/arduino-esp32 and https://github.com/Bodmer/TFT_eSPI .
The modified library is available for download in the Download section. The User_Setup_Select.h file in the TFT_e_SPI folder is the one that requires configuration, that is, the line " #include will be commented " and the line " #include will be uncommented ".
The ESP32 Arduino -> TTGO LoRa32-OLED v2.1.6 board is selected
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
