Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Robot kit, Self Balancing Triangle, ESP32
Self-balancing intelligent robot based on the LQR algorithm, ideal for control and programming experiments. It uses a motor-driven metal wheel as a stabilizer, runs on ESP32 programmable in Arduino IDE or PlatformIO, includes RGB lights for visual feedback and comes ready assembled. It is easily charged via USB Type-C and runs on a LiPo battery, compact and lightweight for quick demonstrations.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
Intelligent robot that uses an LQR (Linear quadratic regulator) algorithm to maintain balance. It uses a motor coupled to a metal wheel that it uses as a stabilizer through its rotation.
It is based on an ESP32 microcontroller that can be programmed using Arduino IDE, PlatformIO or other compatible environments.
There are RGB lights present on the board.
This robot comes fully assembled.
Specifications:
Microcontroller: ESP32
Battery type: LiPo
Dimensions: 90mm (W) x 35mm (H)
Weight: 40g
Use:
Fully charge the battery using the USB Type-C connector integrated on the motherboard. Place the robot on the included mouse pad for optimal grip and place it on one of the sides (not on top). Turn it on using the power switch and wait for it to calibrate for a few seconds until it starts to rock.
It is important that the mouse pad does not slip. If the mouse pad is fixed, the triangle will swing until it stabilizes on the top. It can also be placed manually on the top and it will remain in balance.
Package contents:
1 x Robot
1 x Mouse pad
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
