Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Programmable resistor board, 8 decades, 0-9999999.9 Ohm, SMD resistors 1/2W
Adjustable resistance module for laboratory and quick testing of DC circuits, allows selection of value via jumpers on 8 decades. Offers range 0.1 Ohm to 9,999,999 Ohm with 0.1 Ohm resolution, uses SMD 1/2W resistors in series for precise adjustment, has output on 2.54 mm pins and compact size for the workbench.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
Settable resistance board, with 8 decimal points, which uses 1/2W SMD resistors and can offer a resistance between 1 and 9999999 Ohms, with a step of 0.1 Ohms.
This board can be used for educational purposes or for testing DC electronic circuits. This model is based on the principle of resistors in series to bring the resistance to the desired value.
Careful! It is not a power resistor! The maximum power of the resistors is 0.5W.
The adjustment is done using decade by inserting the jumpers in the desired values. Each segment controls one decimal of the desired value, for a total of 8 decimals.
Specifications:
Resistance range: 1 - 9,999,999 Ohm
Resolution: 0.1 Ohm
Resistors type: SMD
Resistor power: 0.5W (1/2W)
Adjustment ranges: x0.1, x1, x10, x100, x1000, x10k, x100k, x1M
Control mode: Jumper Cap
Output: Pins 2.54mm
Dimensions mm: 100 x 35 x 10mm
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
