Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Powerbank kit, transparent case, QC4.0, PD, 22.5W, 8P
Assemble a custom powerbank from 8 18650 cells, with a transparent case and LED display for the charge level. It offers PD fast charging up to 22.5W and QC4.0, can simultaneously power three devices via 2x USB and 1x USB-C. The USB-C port works for both charging and discharging, the kit includes the board, case and mounting accessories.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
DIY Powerbank with 22.5W PD (Power Delivery) and Quick Charge (QC4.0) compatible output, is a kit composed of the case, electronic board, screws and all the elements necessary to assemble a Powerbank with a maximum capacity of 28.000mAh when using 3.500mAh.
Can install 8 18650 cells ( NOT included ). Installation requires a spot welder. We do NOT recommend this product to those who are not experienced in assembling cell packs .
It has two standard USB ports and one Type-C port, which can power three devices at the same time. The USB Type-C port works both for charging and discharging.
The output ports are PD compatible up to 22.5W and QC4.0.
Batteries are not included, they must be purchased separately and installed by you.
The power bank has a built-in LED display that displays the charging status of the cells, it lights up during charging or when the button is pressed.
Specifications:
Cell capacity: 8
Cell configuration: 1S8P
Nominal voltage: 4.2VDC
Material: ABS-PVC
Color: Yellow
Size: about 148x47x54mm
Input port: USB Type C female
Output port: 2x USB female
Input: DC5V/2.1A 20W
Output: 2x PD22.5W + QC4.0
Quantity: 1 kit (Not including 18650 battery and charging cable)
Use:
When powering up the module it will indicate 0% . Especially if you are testing the board before connecting to the batteries, DO NOT exceed the maximum voltage of 4.2VDC otherwise the IC will burn out.
The board requires ACTIVATION , meaning once connected to the battery, it must be charged, in this way the board will activate and the percentage displayed on the screen will be the correct one.
Activation must be done every time voltage is lost to the board.
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
