Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
PD fast charging module, USB Type C, 65W, 8-30V
Compact USB Type C fast charging module, ideal for electronic projects, DIY power banks and universal stations, delivers up to 65W with high efficiency, supports PD3.1 PPS, QC3.0, Huawei FCP SCP and Samsung AFC, automatically adjusts output between 3.3V and 21V depending on the device, includes overvoltage, overcurrent and overheating protections, 8-30V DC power supply.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
PD65W module with power supply between 8 and 30VDC for electronic projects and DIY stations, offering fast charging via USB Type C with support for modern protocols such as PD3.1 PPS, QC3.0, Huawei FCP SCP and Samsung AFC.
This module can automatically adjust the output voltage between 3.3V and 21V when connected to a compatible device, ensuring stable and safe charging. Its design integrates features such as overvoltage, undervoltage, overcurrent and overheating protection, and the conversion efficiency of up to 97% makes it ideal for projects where space is limited and stability is important. The small size of only 20 x 20 mm and the weight of 7 g allow for easy integration into custom circuits, DIY power banks or universal charging stations.
The module can be connected, together with other modules, to a battery pack to provide 65W PD charging. With this power, even laptops that support PD charging can be quickly charged.
Important : The output voltage cannot be higher than the input voltage. For example, to use a 20V PD, an input voltage higher than 20VDC is required.
Specifications:
Input voltage: DC 8 - 30 V
Output voltage: 3.3 V - 21 V self-adjusted depending on the device
Output: PD, Power Delivery
Maximum power: 65 W
Conversion efficiency: 92% - 97%
Output voltage ripple: <200 mV
No-load current: <3 mA
Interface: USB Type-C
Integrated protections: overvoltage, undervoltage, overcurrent, short circuit, overheating
Weight: 7g
Dimensions: 20 x 20 mm
Supported protocols:
BC1.2 Apple Protocol
QC2.0 QC3.0
Huawei FCP SCP
Samsung AFC
MTK PE+ 1.1 and MTK PE+ 2.0
PD2.0 PD3.1 PPS
Use:
Connect the module input to a DC power source between 8 and 30 V or a battery (recommended above 20V as minimum voltage), by soldering on the available PADs marked with + and -.
Connect the charging device via USB Type C cable.
The module automatically identifies the protocol and voltage required for fast charging.
To activate 20 V fast charge the input voltage must be greater than 20 V.
Ensure ventilation and avoid overheating the module.
ATTENTION! The module does not allow charging the battery!
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
